Table of Contents
Advertisement
CAUTION:
1. The heat sink and fan you installed must be approved by AMD.
2. The mainboard must be placed on a solid place to avoid shaking
|||||while install the heat sink and fan on the board.
3. The heat sink must be contact with the CPU top tightly.
4. Never run the processor without the heat sink properly and firmly
attached. PERMANENT DAMAGE WILL RESULT!
To install the CPU, do the following:
1.
Lift the lever on the side of the CPU socket.
2.
Handle the chip by its edges and try not to touch any of the pins.
3.
Place the CPU in the socket. The chip has two notches to correctly locate
the chip. Align two notches of the processor with the two triangular
marks on the socket. Do not force the chip. The CPU should slide easily
into the socket.
4.
Swing the lever to the down position to lock the CPU in place.
5.
Install the cooling fan with heat sink on top of the installed CPU.
6.
Place the mainboard (with the CPU, its cooling fan, and heat sink) into the
system chassis and affix it with screws.
Installation Procedures
2 - 13
Advertisement
Table of Contents
