Administration > Factory Defaults - Cisco Linksys E1000 User Manual

Linksys E1000
Times to Ping Enter the number of times you wish to test
the connection . The default is 5 .
Start to Ping
To run the test, click this option . The Ping
screen shows if the test is successful . Click Close to return
to the Diagnostics screen . Click Stop to stop the test .
Diagnostics > Ping
Traceroute Test
Traceroute checks the performance of a connection .
IP or URL Address
Enter the address of the computer,
device, or website whose connection you wish to test .
Start to Traceroute
To run the test, click this option .
The Traceroute screen shows if the test is successful . Click
Close to return to the Diagnostics screen . Click Stop to
stop the test .
Wireless-N Router
Chapter 2: Advanced Configuration
Diagnostics > Traceroute
Administration > Factory Defaults
The Factory Defaults screen allows you to restore the
Router's configuration to its factory default settings .
NOTE:
Do not restore the factory defaults unless
you are having difficulties with the Router and
have exhausted all other troubleshooting
measures . Once the Router is reset, you will have
to re-enter all of your configuration settings .
Administration > Factory Defaults
Factory Defaults
Restore All Settings
To reset the Router's settings to the
defaults, click this option and then follow the on-screen
instructions . Any settings you have saved will be lost when
the default settings are restored .
26