Advertisement
PROGRAMMING
ST6008B,C 7-day Timer
The weekly program dial displays the seven days of the week
and the AM and PM indications for each day. The 24-hour dial
is marked in two-hour and AM and PM indications.
Set the Time Switch:
NOTE: Each tripper represents two hours.
Push the desired number of trippers to the outer ring
position for the entire period the load is on. This places
the switch in the on position.
Push the desired number of trippers to the inner ring
position to turn off the load. This places the switch in
the off position. See Fig. 1.
Set the Time:
NOTE: Rotate the outer dial clockwise by turning the minute
hand.
Turn the minute hand clockwise until the day and time
on the outer dial are aligned with the triangle marker
(2:00 position) on the inner dial.
Example: To set the dial to Monday, 10:30 AM: Turn
the minute hand clockwise to rotate the outer dial
until Monday 10:30 AM is aligned with the triangle on
the inner dial. The hour and the minute hand show
10:30 AM.
ST6008A 24-hour Timer
The 24-hour dial is marked in quarter-hour and AM and PM
indications.
Set the Time Switch:
NOTE: Each tripper represents 15 minutes.
Push the desired number of trippers to the outer ring
position for the entire period the load is on. This places
the switch in the on position.
Push the desired number of trippers to the inner ring
position to turn off the load. This places the switch in
the off position. See Fig. 1.
ST6008A,B,C ENERGY MANAGEMENT TIMERS
Set the Time:
NOTE: Rotate the outer dial clockwise by turning the minute
hand.
Turn the minute hand clockwise until the time on the
outer dial is aligned with the triangle marker (2:00
position) on the inner dial.
Example: To set the dial to10:30 AM: Turn the
minute hand clockwise to rotate the outer dial until
10:30 AM is aligned with the triangle on the inner
dial. The hour and the minute hand show 10:30 AM.
Manual Override
All ST6008 units have an optional three-way manual override.
TERMINAL DESIGNATIONS
OFF POSITION WITH TRIPPERS PUSHED IN
(TRIPPERS PUSHED OUT WILL CLOSE
CONTACTS 3 AND 4 AND TURN LOAD ON)
M
2
1
INPUT
3
4
3
5
C
NO
NC
M11339
68-3002
Advertisement
