Kenmore 148.23683310 Use & Care Manual page 19

Put the drip tray onto the drip tray support as shown.
Drip Tray Support
Cut tie wraps holding regulator and side burner valve in place underneath grill head control panel. Be
10
careful not to cut igniter wires or the tie wraps holding the igniter wires in place.
With the aid of an assistant, lift and place grill head onto cart. Grill head sides go over attachment
tabs on cart. Make sure that side burner valve hangs outside the cart, and that regulator and igniter
wires hangs inside the cart. Attach head to cart with 4 screws as shown.
Burner Box
Cabinet
Drip Tray
19
3/16-24 x 1/2"Screw
Qty. 4