Configuration Information - Factory Integrated Models - HP ProLiant DL1000 Quickspecs

QuickSpecs

Configuration Information - Factory Integrated Models

NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are NOTE: NOTE: NOTE:
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on
configurable product offerings and requirements.
NOTE: NOTE: NOTE: Configure-to-order (CTO) servers must start with a CTO Chassis. NOTE:
NOTE: FIO indicates that this option is only available as a factory installable option. NOTE: NOTE: NOTE:
Step 1: Base Configuration (choose one from each list unless otherwise noted) Step 1: Base Configuration (choose one from each list unless otherwise noted) Step 1: Base Configuration (choose one from each list unless otherwise noted) Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis HP Chassis HP Chassis HP Chassis
HP Nodes HP Nodes HP Nodes HP Nodes
HP Drive Cage Options HP Drive Cage Options HP Drive Cage Options HP Drive Cage Options
HP Power Supplies HP Power Supplies HP Power Supplies HP Power Supplies
HP ProLiant h1000 G6 2U Chassis
HP h1000 2 Node Side by Side FIO Kit
HP h1000 3 Node FIO Kit
HP h1000 4 Node FIO Kit
HP ProLiant DL170h G6 Node 1 Configure-to-order Server
HP ProLiant DL170h G6 Node 2 Configure-to-order Server
HP ProLiant DL170h G6 Node 3 Configure-to-order Server
HP ProLiant DL170h G6 Node 4 Configure-to-order Server
NOTE: NOTE: NOTE: A minimum of two nodes are required per 2U chassis. There are only three NOTE:
options for ordering DL170h G6 Nodes.
1) 2 Node Config: user must order Nodes 2 and 4;
2) 3 Node Config: user must order Nodes 1, 2 and 4; or
3) 4 Node Config: user must order Nodes 1, 2, 3 and 4.
NOTE: NOTE: NOTE: Additional nodes cannot be added later to 2 or 3 node configurations. NOTE:
HP h1000 G6 8 LFF Drive Cage FIO Kit
NOTE: This selection requires that only SATA drives can be selected and SAS NOTE: NOTE: NOTE:
Controller cannot be added to any node.
HP h1000 G6 8 LFF Drive SAS Ctlr Cage FIO Kit
NOTE: With this selection, SAS and SATA drives can be selected but a SAS controller NOTE: NOTE: NOTE:
must be selected for each node.
HP h1000 G6 16 SFF Drive Cage FIO Kit
NOTE: NOTE: NOTE: This selection requires that only SATA drives can be selected and SAS NOTE:
Controller cannot be added to any node.
HP h1000 G6 16 SFF Drive SAS Ctlr Cage FIO Kit
NOTE: With this selection, a SAS controller must be selected for each node. NOTE: NOTE: NOTE:
NOTE: Prior to making a power supply selection it is highly recommended that the HP NOTE: NOTE: NOTE:
Power Advisor is run to determine the right size power supply for your server
configuration. The HP Power Advisor is located at:
NOTE: NOTE: NOTE: NOTE: Selection of a Common Slot High Efficiency or Platinum Power Supply requires
the purchase of a Common Slot Power Supply Backplane FIO Kit (P/N: 516136-
B21).
HP 460W Common Slot Gold Hot Plug Power Supply Kit
HP 750W Common Slot Gold Hot Plug Power Supply Kit
HP 750W Common Slot Platinum Hot Plug Power Supply Kit
HP 1200W Common Slot Platinum Hot Plug Power Supply Kit
HP 1200W Common Slot Silver Hot Plug Power Supply Kit
HP 750W Factory Integrated Power Supply Kit
NOTE: Selection of an Industry Standard Power Supply requires the purchase of a Fan NOTE: NOTE: NOTE:
Controller FIO Kit (P/N: 516000-B21).
DA - 13309
HP ProLiant DL1000 Multi Node Server HP ProLiant DL1000 Multi Node Server
www.hp.com/go/hppoweradvisor
Canada — Version 31 — April 8, 2011
HP ProLiant DL1000 Multi Node Server HP ProLiant DL1000 Multi Node Server
507653-B21
516030-B21
518028-B21
518029-B21
507638-B21
507639-B21
507640-B21
507641-B21
507654-B21
538666-B21
507655-B21
538667-B21
503296-B21
512327-B21
593831-B21
578322-B21
500172-B21
515997-B21
Page 19