Advertisement
4. Click the Phone tab then locate the General area.
5. In the Voice Mail Number field, enter *97.
6. Click the Ext 1 tab then scroll down to the Proxy and Registration area.
7. In the Proxy field, enter the proxy address that displayed under the Device
Settings for (extension) area when you created a generic extension in Evolution
PBX.
8. In the Use Outbound Proxy drop down, select No.
Note: These phones support 1, 2 4 or 6 different extensions depending on the
type of phone you have. If you complete Ext 1 then you will see four line
appearances for one extension on your phone. If you complete Ext 1 and Ext 2
then you will see two line appearances for each extension on your phone. If you
provision Ext 1, Ext 2, Ext 3 and Ext 4 as separate extensions then you will see
four separate extensions on your phone.
Note: This is not supported on devices such as Polycom or Cisco Phones.
Page 7 of 8
Advertisement
