ADSL2+ Gateway with VoIP
The Administration - Factory Defaults Tab
Factory Defaults
Restore Factory Defaults. If you wish to restore the Gateway to its factory default settings and lose all your
settings, click Yes.
To begin the restore process, click the Save Settings button to save these changes, or click the Cancel
Changes button to undo your changes.
The Administration - Firmware Upgrade Tab
The Gateway allows you to upgrade firmware from the LAN (Local Area Network) side of the Gateway.
Upgrade from LAN
To upgrade the Gateway's firmware from the LAN:
1. Download the Gateway's firmware upgrade file from www.linksys.com.
2. Extract the file on your computer.
3. Click the Browse button to find the firmware upgrade file.
4. Double-click the firmware file that you have downloaded and extracted.
5. Click the Upgrade button, and follow the on-screen instructions.
To cancel the firmware upgrade, click the Cancel Upgrade button.
IMPORTANT: Do not turn off the power or press the reset button while the upgrade is in
process.
Chapter 6: Configuring the ADSL2+ Gateway
The Administration - Factory Defaults Tab
Figure 6-43: Factory Defaults
Figure 6-44: Firmware Upgrade
48