●
aria
186/ 100/ 34E - DIGITAL KEY TELEPHONE SYSTEM USER GUIDE
Access Authorization Code
To prevent unauthorized outside calling, DISA access or Trunk access on your station by others,
the system provides a means to lock/unlock a station by access authorization code.
On LKD-2N/S, 8D/S,
Button
Conference feature can be accomplished by programming
●
a flexible key as CONF button (TRANS + 91).
To register access authorization code,
Press TRANS/PGM button and dial 4 4
●
Dial your own 5 digits access authorization code.
●
Press HOLD/SAVE button.
●
Confirmation tone is heard.
●
Blocking Outside Calls
Note : An access authorization code should be registered.
Button
Press TRANS/PGM button and dial 4 6
●
Press HOLD/SAVE button. (Confirmation tone is heard.)
●
MUTE button will flash until restored to normal.
●
Restoring Outside Calls
Button
Press TRANS/PGM button and dial 4 7
●
Dial your current access authorization code.
●
(Confirmation tone is heard.)
MUTE button will be extinguished.
●
Using Dial By Name
Each station and speed dial number can be assigned to a name. When names are programmed,
you may select a speed dial number by the stored name.
Button
Press SPEED button twice.
●
On the display, you will see:
●
Select desired type.
●
1 : Intercom
2 : User (Station Speed Dial)
3 : System (System Speed Dial)
Confirmation tone is heard and you will see (above):
●
Press the VOLUME button to see the next two names.
●
You may enter characters using the code in "Storing Dial by
●
Name". The LCD will display the first two names which match
your input.
To select the name in line 1, press HOLD/SAVE button.
●
To select the name in line 2, dial 2 and press HOLD/SAVE
●
button.
The call is placed automatically.
●
Procedures
Procedures
Procedures
Procedures
DIAL BY NAME
ICM : 1 U_SPD : 2 S_SPD : 3
1 : XXXX XXXX XXXXXX
2 : YYYY YYYY YYYYYY
19
Range
Range
Range