Detaching/ Attaching The Faceplate And Insert A Sd Card - Kenwood DNX5350BT Quick Start Manual

Detaching/ Attaching the
faceplate and insert a SD Card
Ñ DNX5350BT
⿠Detaching the faceplate
1) Slide the Release key upward to detach the
part of the front panel.
1
2
⿠Insert a microSD Card
1) Slide the Release key upward to detach the
part of the front panel.
2) Hold the microSD card with the label side
facing left and the notched section up, and
insert it into the slot until it clicks.
⿠Attaching the faceplate
1) Hold the panel securely so as not to drop
it accidentally, and fit it onto the attaching
plate until it is firmly locked.
2
1
12
ñ English
✎
NOTE
• When detaching a part of the front panel, detach
it toward the front side as shown in the diagram
above. If it is detached upward, the front panel
will be broken.
• To prevent deterioration, do not touch the
terminals of the unit and front panel with your
fingers.
• If the terminals on the unit or front panel get
dirty, wipe them with a clean soft dry cloth.
Remove the panel before this happens.
Ñ DNX535VBT
⿠Detaching the faceplate
1) Slide the Release key rightward to detach the
part of the front panel.