Casio 2594 User Manual

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the
most out of your purchase, be sure to carefully read this manual and
keep it on hand for later reference when necessary.
Expose the watch to bright light to charge its battery before using
it.
You can use this watch even as its battery is being charged by
exposure to bright light.
•Be sure to read "Battery" for important information you need to
know when exposing the watch to bright light.
If the display of the watch is blank...
If the Power Saving indicator is on the display,
Power saving indicator it means that the display is blank because the
watch's Power Saving function has turned off
the display to conserve power.
A B
• The initial factory default setting is Power
Saving on.
• The watch recovers from the sleep state if
C D
you press any button (except A).
• See "To enter the Power Saving Mode"
for more information.

General Guide

• If the digital display of your watch is continuously changing, see
"To turn off Auto Display" for information on how to stop it.
• Press C to change from mode to mode.
Timekeeping Mode
Press C.
A B
C D
L
Timekeeping
Use the Timekeeping Mode to set and view
Month – Day
Year
the current time and date.
Day of week
To reset the seconds count to zero
A B
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
indicates the setting screen.
C D 2. Press D to reset the seconds count to
• Pressing D while the seconds count is
Hour : Minutes
in the range of 30 to 59 resets the
seconds to
PM indicator
Seconds
minutes. In the range of 00 to 29, the
minutes count is unchanged.
3. Press A to exit the setting screen.
To set the time and date
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
A B
indicates the setting screen.
2. Press C to move the flashing in the
sequence shown below to select other
C D
settings.
Seconds DST
Day Month
• See "Daylight Saving Time (DST)" for details on the DST setting.
3. While a setting is flashing, use D (+) and B (–) to change it.
• When the 12/24-hour setting is selected, press D to toggle
between 12-hour ( 12H ) and 24-hour (
4. Press A to exit the setting screen.
USER'S GUIDE 2594
World Time Mode
00 .
00 and adds 1 to the
Hour Minutes
12/24-Hour
Year
Format
24H ) timekeeping.
About This Manual
• Button operations are indicated using the
letters shown in the illustration.
• Each section of this manual provides you
A B
with the information you need to perform
operations in each mode. Further details
and technical information can be found in
C
D
the "Reference" section.
L
• In any mode, press L to illuminate the display.
Data Bank Mode
Countdown Alarm Mode
Daylight Saving Time (DST)
Daylight Saving Time automatically advances the time setting by one
hour from Standard Time. Remember that the not all countries or even
local areas use Daylight Saving Time.
To toggle the Timekeeping Mode time between DST and Standard
Time
1. In the Timekeeping Mode, hold down A
until the second digits start to flash, which
A B
indicates the setting screen.
2. Press C to move the flashing to the DST
On/Off setting.
C D
3. Press D to toggle between Daylight Saving
Time (
4. Press A to exit the setting screen.
• The DST indicator appears on the display
to indicate that daylight saving time is
turned on.

World Time

The World Time Mode shows you the current
GMT differential
time in 27 cities (29 time zones) around the
Timekeeping Mode time
world.
• For full information on city codes, see the
City code
"City Code Table".
• The time settings of the Timekeeping Mode
A B
and the World Time Mode are independent
from each other, so you must make
separate settings for each.
C D
• Whenever you change the time setting for
any city in the World Time Mode, the settings
Current time in the
of all other cities are changed accordingly.
selected city code
• World Time functions are available in the
World Time Mode, which you can enter
using C.
Alarm Mode
Stopwatch Mode
ON ) and standard time ( OFF ).
1