Incorporating A Sampled Sound Into A Drum Set (Drum Sampling - Casio CTK-5200 User Manual

Sampling Sounds and Playing Them on the Digital Keyboard
Incorporating a Sampled Sound
into a Drum Set (Drum Sampling)
You can use the procedure to change the drum sounds that
are assigned to each keyboard key.
• You can store up to three drum sets and store them as tone
numbers 606, 607, and 608. Simply select the tone number
where the drum set you want is located to assign the drum
set sounds to the keyboard.
1. bo
Press (RHYTHM).
2. bn
Press (TONE) and then use
enter the tone number (606, 607, or 608) for the
drum set whose sounds you want to change.
N o
Lights
3. cr cs
Press and
N o
Flashes
E-22
br
(10-key) to
D a t a
at the same time.
D a t a
4.
Press the keyboard key to which you want to
assign the drum sound you are about to
sample.
This enters sampling standby.
The allowable sampling time (in seconds) will appear on
the display momentarily and then the display will change
to the following.
W a i t i n
Flashes
5.
Output sound from the external device.
Sampling will start automatically.
• Sampling will not start if the volume of the sound is too
low.
S a m
Flashes
g
l i n
p g