Cleaning The Watercraft - Yamaha XLT1200 WaveRunner 2002 Owner's/Operator's Manual

EJU01196

Cleaning the watercraft

Clean the watercraft before storing it for a
long period.
WARNING
@
Do not spray flammable rust inhibitor
products on engine surfaces while the
engine is hot. The sprayed substance or
propellants could catch fire.
@
1. Wash down the hull, handlebars, and
drive unit with fresh water.
2. Rinse the engine and bilge area with
fresh water. Drain off all water and wipe
up remaining moisture with clean, dry
rags.
3. Spray the engine's exterior with Yamaha
Silicone Protectant and Lubricant.
4. Wax the hull with a non-abrasive wax
such as Yamaha Silicone Wax.
5. Wipe all vinyl and rubber components,
such as the seat and engine compart-
ment seals, with a vinyl protectant such
as Yamaha Protectant.
4-6
E