Operation - Yamaha CRW6416S Series Owner's Manual

Operation

This section explains how to operate the CRW6416S drive after you have
installed it.
Loading a Disc
1 Press the Eject button on the CRW6416S drive' s front panel.
2 Place the disc onto the tray with its label or printing facing upward.
3 Press the Eject button to close the tray.
n When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to green. For
more details, refer to page 38.
n Do not push or pull the tray using excessive force. Doing so can damage the drive or the disc.
Instead, always use the Eject button to open or close the tray.
Ejecting the Disc
1 Press the Eject button on the CRW6416S drive' s front panel.
2 Remove the disc from the tray.
3 Press the Eject button to close the tray.
1
1
31
2
2