Grip/Thumb Warmer Adjustment Switch; Brake Lever - Yamaha FXNytro FX10RTRSZ Owner's Manual

Control functions
1. Headlight beam switch "LIGHTS"
2. High beam "HI"
3. Low beam "LO"
ESU10674
Grip/thumb warmer adjustment
switch
The grip/thumb warmer adjustment switch
controls the electrically heated handlebar
grips and throttle lever.

1. Grip/thumb warmer adjustment switch

To raise the temperature
To raise the grip warmer temperature, press
the " " side of the switch. To raise the thumb
warmer temperature, press the "
the switch.
To lower the temperature
Continue to press the switch until the temper-
ature level returns to the minimum level, and
then raise the temperature to the desired lev-
el.
See "Fuel meter and grip/thumb warmer level
indicator" on page 12 for detailed information.
16
ESU13520

Brake lever

The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.
1. Brake lever
TIP
When the brake lever is operated, the brake
light will illuminate.
The brake lever is equipped with a position
adjuster.
To adjust the brake lever position:
1. Loosen the locknut.
2. While lightly pushing the brake lever in di-
rection (a), finger tighten the adjusting
bolt to set the brake lever to the desired
position.
" side of
1. Locknut
2. Adjusting bolt
3. Tighten the locknut securely after adjust-
ing the brake lever.