Vcr Setup - LG 22LQ630H Owner's Manual

VCR SETUP

To avoid picture noise (interference), leave an adequate distance between the VCR and TV.
V
If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen.
V
This phenomenon is common to all TVs and is not covered by warranty.
Antenna Connection
1. How to connect
1
Connect the RF antenna out socket of the VCR to the
ANTENNA IN socket on the TV.
2
Connect the antenna cable to the RF antenna in
socket of the VCR.
2. How to use
Set VCR output switch to 3 or 4 and then tune TV to the
V
same channel number.
Insert a video tape into the VCR and press PLAY on the
V
VCR. (Refer to the VCR owner's manual.)
ANT OUT
S-VIDEO S-VIDEO VIDEO VIDEO L L R R
OUTPUT OUTPUT ANT IN
SWITCH SWITCH
Wall Jack
Antenna
ANTENNA IN
1
2
23