Honeywell Programmable Thermostat Owner's Manual page 10

To determine which type of recovery is set into your thermostat, make
sure thermostat is powered with fresh batteries, or is mounted and
powered on the wall (see page 32).
RUN
Press key. Check thermostat display.
PROGRAM
• If the shows in the lower right-hand corner (see illustration), the
thermostat is set for conventional recovery. If you would rather have
Programmed Recovery, remove thermostat from wallplate, turn
screw 3A (on back of thermostat) clockwise
NOT OVERTIGHTEN.
• If the does not show, the thermostat is set for Programmed
Recovery. If you would rather have conventional recovery, remove
thermostat from wallplate, turn screw 3A (on back of thermostat)
out 1/2 to 1 turn.
RECOVERY SETTING
AM
MON
WAKE
INDICATES
THERMOSTAT IS SET
FOR CONVENTIONAL
RECOVERY
until it bottoms. DO
6