Playing Karaoke - Sharp HT-DV40H3 Operation Manual

Playing karaoke

HT-DV40H3
HT-DV50H3
ENGLISH
You can enjoy karaoke to DVDs, video CDs, audio CDs and MP3
Discs by connecting separately available microphone to this unit.
E-57
1 2 3
4 5 6
7 8 9
0 + 1 0
1
Press the ON/STAND-BY button to turn the power on.
2
Set the MIC VOL control to MIN to protect the speakers
from shock noise and to avoid disturbing noises.
3
Connect the microphone to the MIC 1 or MIC 2 socket or
both sockets for enjoying duets.
Use a microphone with a 6.3 mm (1/4") plug, an impedance of
600 ohms.
Use a standard plug adaptor when using a microphone with a
3.5 mm (1/8") diameter plug.
4
Press the DVD/CD, TUNER, USB or AUX button to select
the audio source and play it.
5
Adjust the volume of the audio source using the VOLUME
control.
6
To control the volume of both microphones, press MIC
VOL (+) to increase and MIC VOL (-) to decrease.
7
Press the ECHO (+ or -) on the remote control whilst press-
ing down the SHIFT button, to adjust the microphone echo.
Notes:
When you sing too loud through the microphone, your voice may be
distorted depending on the devices connected. If this happens, lower
the microphone volume.
If an extremely sensitive microphone is used, howling may be
generated.
Unidirectional microphone is more appropriate for vocal use.
When you connect or disconnect a microphone, the sound is muted for a
few seconds.
If squealing occurs:
Reduce the microphone volume.
Change the direction of the microphone.
Reduce the volume of the main unit.
Move the microphone away from the speakers.
Caution:
When not using the microphone, remove it from the MIC socket.
When connecting or disconnecting the microphone, set the MIC
VOLUME control to MIN.
When using only one microphone, unplug the other.