Connecting A Pc; Displaying A Pc Image On The Screen - Sharp AQUOS LC-40LE822E Operation Manual

Connecting a PC

Connecting a PC
HDMI connection
PC

HDMI-certified cable
PC

ø 3.5 mm stereo
minijack cable
* When using the HDMI 2 terminal, you must select the proper
item in the "Audio select" menu depending on the type of HDMI
cable connected (refer to page 30 for details).
Analogue connection
PC

RGB cable
PC

DVI/RGB conversion
cable
* When using the EXT 3 terminal, you must select "Video+Audio"
in the "Audio select" menu (refer to page 30 for details).
48
HDMI 1, 2, 3 or 4
HDMI 2*

DVI/HDMI cable
EXT 3*

ø 3.5 mm stereo
minijack cable
EXT 3*

ø 3.5 mm stereo
minijack cable
E
After connecting
You must also set "RGB" from the "Input select" menu
when selecting "EXT 3" from the "INPUT" menu (Pages
17 and 42).
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 49 for a list of PC signals compatible with the TV.
Displaying a PC image on the
screen
Selecting the picture size
You can select the picture size.
1
Press f.
• The "Wide mode" menu displays.
Press f or a/b to select the desired item.
2
EXAMPLE
Normal
Keeps the original aspect ratio in a full
Normal
screen display.
For letterbox pictures. Bars may appear
Cinema on the top and bottom with some
programmes.
Full An image fully fills the screen.
Displays an image with the same
Dot by Dot
number of pixels on the screen.
NOTE
You can also select an item by pressing f on the remote
•
control unit.
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• Refer to page 39 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
ANALOGUE RGB: 576p/720p (50 Hz)/1080i
• The ANALOGUE RGB (PC) terminal (EXT 3) is not compatible
with 480i/576i/1080p signals.
Full
Item