Switching On The Appliance - Smeg CR312AP Instruction Booklet

• The appliance is not intended for use by people (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they
don't play with the appliance.
• If the supply cord is damaged it must be replaced by the manufacturer or service agent
or appointed person.

Switching On the Appliance

• Before switching on, place the appliance on upright position and
wait at least three hours without moving the appliance. This will
give the refrigerant circuit time to settle and operate efficiently.
• Clean the appliance thoroughly, especially in the interior, before use (See Cleaning and
Maintenance).
• Installation of the appliance and electrical connections must
be carried out by a qualified technician, in accordance with the
Installation Manual and local regulations.
• Installation procedure into the kitchen unit is given in the Installation
Manual. This product is intended to be used in proper kitchen units
only.
• The appliance must be connected with a properly installed fused
socket. Power supply (AC) and voltage at the operating point must
with the details on the name plate of the appliance (name plate is
located on the inside left of the appliance).
• Insert the plug into a socket with an efficient ground connection. If
the socket has no ground contact or the plug does not match, we
suggest you to call an authorized electrician for assistance.
• If the supply cord is damaged, It must be replaced by an appointed
service agent or similarly qualified person in order to avoid a
hazard
• Manufacturer is not responsible for failure to complete the ground connection as
described in this booklet.
• There can be an odor when you first switch on the appliance. It will disappear after the
appliance starts to cool.
EN - 17 -