Targus 100W Automobile Power Inverter Quick Start Manual

Auto/Dual Digital Device Adapter
APP20AP (sold separately)
Note: Please only use Targus
designed accessory only
Digital Device tip (sold
seperately)
For tip compatibility, go to Web site below.
http://www.targus.com/
WARNING
If the external flexible cord of this
inverter is damaged, it shall be
replaced by the manufacturer or its
service agent or a similar qualified
person in order to avoid a hazard.
CAUTION
Regularly check that the input and
output connections are tight. Loose
connections can generate harmful heat
and / or damage the inverter or power
source. Avoid shock hazard.
Cigarette Lighter Adapter
(CLA)
Electrical Ratings:
Isolated Inverter
Input: 12 = 15A max
AC Output: 240V~50Hz 100W
USB Output: 5V=0.5A
PPS Output: 12-16V=0.85A
For indoor use only
Operating Period: 6 Hours
Typical Usage
This listing is for reference purpose only.
Some devices exceed the wattages listed.
Before using the device, please refer to the
owner's manual for actual wattage required.
Play Station
Cellular Phone Charger
Portable Color Printer
Hi-Fi 4 head Stero VCR
13" color TV
Notebook computer
CD player
Work Light
Features and specifications subject to change without notice. © 2007, Targus Australia Pty Ltd 117-119 Bowden Street, Meadowbank NSW 2114 Australia.
Targus Powering Port
System (PPS)
PDA Mobile phone
MP3 player
DC
auto
WARNING
Any electric appliance with the power consumption
beyond 100W is not allowed. This inverter is not
recommended for use with inductive loads, such as
fluorescent lamps or pumps and most heat genera-
10 Watt
tion equipment such as hair dryers, coffee makers,
25 Watt
irons, heaters and toasters. Permanent damage to
30 Watt
the unit and excessive overheating may result.
40 Watt
70 Watt
50 Watt
85 Watt
100 Watt
100W Automobile
Power Inverter
Cup-holder Style
USB Port
(DC power only)
AC output
(AU type, 240Vac non-grounded)
Power / Fault Indicator
This light will turn off if the inverter encoun-
ters problems.
LED is ON
– Normal operation.
LED is flashing
– Low voltage warning
signal indicates the supply voltage is low.
LED is OFF
– Unit is off and no power is
being output. Either the inverter is not
plugged into a powered socket or it has gone
into protection mode due to overheating,
overvoltage, overloading or short circuit.
Also check if fuse is not damaged (see
below for more fuse instructions)
WARNING - Ventilation openings
• Do not block or cover any louvered vents. Place the inverter on a
flat surface with good ventilation between 0-25 o C and ideally
15-25 o C.
• Do not place the inverter on or near a heating vent or any piece of
heat generating equipment. Keep inverter away from direct
sunlight, if at all possible.
• Do not allow water or other liquids to come into contact with the
inverter.
Fuse
CAUTION
This inverter is fitted with a 15A fuse. Once the
fuse blows, replace with a same specification
and type fuse. Simply unscrew the top of the
adapter and remove the fuse. Usage of another
type fuse or metal wire will cause abnormal
overheating or even fire hazards.
+
Note: When replacing the fuse, please make sure that
all the electrical device(s) are turned off and the power
cables are unplugged. Make sure the fuse is replaced
correctly before reconnecting the device(s).

Quick Start Guide

APV11AU / 410-0607-009B