Panasonic PV-D4742-K Operating Instructions Manual page 40

Disc Operation (continued)
Random Play (Video CD/CD)
Tracks are played in a random order.
1
Press ACTION *
to display MENU.
2
Press
DVD MAIN MENU
to select "PLAY MODE,"
DISC LANGUAGES
AUDIO OUTPUT
ST I L L MODE : F I E L D
and
TV MODE : L e t t e r b o x 4 : 3
P A R E N T A L L O C K : L E V E L 8
press SET
PLAY MODE PLAY MODE
to display.
SELECT :
SET : SET
END : ACTION
3
Press
PLAY MODE
to select
PROGRAM PLAY
RANDOM PLAY
"RANDOM PLAY," and
press SET
to begin random play.
SELECT :
SET : SET
END : ACTION
• To cancel, press STOP
Setting the Sound Output Level
Audio recorded on a DVD or Video CD often incorporates
a dynamic range of sound.
This means that, when compared to a music CD, etc.,
the average volume is generally lower and the peaks
may be higher. This unit can be set so that the average
volume is increased automatically.
Press AUDIO CONTROL repeatedly to change "ON" ↔ ↔ ↔ ↔ ↔ "OFF."
• "ON" or "OFF" lights up on Multi Function Display (about 3 seconds) when you press
AUDIO CONTROL.
DVD /Video CD
Music CD
• "ON" is set ..... When a DVD or Video CD is played back, the average volume is increased.
• "OFF" is set .... The volume level recorded on the disc is played back just as it is.
Notes
• When audio equipment is connected, setting the Sound Output level to "OFF" is recommended.
• If the sound becomes abnormal while playing a disc, set the Sound Output level to "OFF."
40
*Important:
If a remote control button does not
work when pressed, press the
DVD button on the remote and try
the button again.
during play, then press
CLEAR .
Audio Control "OFF"
Volume level is low.
Ready Checklist
DECK is in DVD mode, press DVD.
STOP
CLEAR
ACTION
SELECT
SET
AUDIO
CONTROL
Audio Control "ON"
Volume level is increased
automatically when played back.