Power And Audio Controls - Panasonic CQ-RDP102N Operating Instructions Manual

Power and Audio Controls

Volume adjustment
1
Note
●
No operation for 5 sec.
a
Return to the regular
mode.
●
If the fader is set to
front, the pre-amp out-
put (rear) is decreased.
6
: Up
¨
: Down
●
Hold down: fast forward
[MUTE] :Toggle the
Mute on and off.
MUTE
●
Mute the sound.
(Hold down over 2 sec.):
Toggle Loudness on and
off.
●
Enhance bass and treble
tones at low volume.
Sound quality adjustment
[SEL] :
Regular Mode
Select a
mode.
Volume
Bass
Treble
Balance
Fader
Power on
on/
Start the engine first!
off
●
[SOURCE] (Hold down) :
Turn the power off.
Notes
●
Power on
The volume increases gradually
●
to the last level if that level was
over 20.
When first powered up, a mes-
●
sage is displayed
●
[DISP]: Stop the message.
●
[SOURCE](Hold down at power
off) :Turn on the power and dis-
play the message.
2
[SOURCE] :
Turn the
power on.
[VOL] : Adjust the level.
: Up
¨
: Down
(–12 to +12 in 3 dB step)
(–12 to +12 in 3 dB step)
(left/right : 1 to 15)
(front/rear : 1 to 15)