Making Video And Audio Connections - Sony WEGA KLV-S23A10 Operating Instructions Manual

To display clear crisp pictures, first you must connect your TV correctly and
also need to choose the correct display format (see "Changing the wide
screen mode" on page 38). It is strongly recommended to connect the
antenna using the supplied 75-ohm coaxial cable to receive optimum picture
quality signal. A 300-ohm twin lead cable can be easily affected by radio
noise and the like, resulting in signal deterioration. [fyou use a 300-ohm
twin lead cable, keep it as far away as possible from the TV.
Making Video and
Audio Connections
Your TV includes several types of video inputs. When connecting your TV,
use the inputs that are available on your devices that provide the best video
performance, as described below.
Best Video
Performance
H_mi
HDMI No
(High-Definition Multimedia Interface)
@ @ @ Component video
,_ p_ po (480i/480p/720p/1080i) Yes
woEo@ S VIDEO L-AUDIO-R
..... @ Composite video
RF/Coaxial No
.S_ When You connect video equipment to both the VIDEO and the S VIDEO input jacks,
make sure Auto YC in the Setup settings is set to On to view the S VIDEO input (see
page 61).
o
".-.I
17