Using The Record Menu; Setting The Scene Mode - Sanyo  Instruction Manual

Using the Record Menu

If you are in Photo Mode, you can access the Record menu simply by pressing the MENU button on your
camera.
When the menu is displayed, use the 4-way navigation control and the OK button to move through menu
selections and apply your desired settings. To close the menu anytime, press the menu button again.
Record Menu
The Record menu allows you to change modes, and setup other
capture settings.
To go to Record Menu:
Set the Mode switch Photo Mode [
1. Press to launch the Record Menu.
2. Use the or
3. To select an item, press
4. Change the submenu settings using the 4-way navigation
control.
5. Press the OK button to save and apply settings.

Setting the Scene Mode

By simply selecting one of the following 34 modes, you can
capture the image with the most appropriate settings.
1. From the Record Menu, press to select Scene Mode.
2. Use the navigation controls to move through the selection.
3. Press the OK button to save and activate the selected
scene mode.
When Battery temperature over 60ºC or Lens temperature over 60ºC, the camera
will shutdown automatically.
].
keys to move through the menu
or OK button.
28