Listening To The Radio; Presetting Stations Automatically; Listening/Confirming The Preset Channels; Manual Tuning - Panasonic SC-XH55 Operating Instructions Manual

Listening to the radio

Presetting stations automatically

Up to 30 stations can be set.
1
Press [RADIO]4 to select "FM".
2
Press [MENU]C.
Each time you press the button:
LOWEST (factory preset):
To begin auto preset with the lowest frequency.
CURRENT:
To begin auto preset with the current frequency.
§ To change the frequency, refer to "Manual tuning" (
3
Press and hold [OK]8.
Release the button when "FM AUTO" is displayed.
The tuner starts to preset all the stations it can receive into the
channels in ascending order.
≥ "SET OK" is displayed when the stations are set, and the radio tunes to
the last preset station.
≥ "ERROR" is displayed when auto presetting is unsuccessful. Preset the
stations manually ( below).

Listening/confirming the preset channels

1
Press [RADIO]4 to select "FM".
2
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10]2
Alternatively, press [X, W]@.
≥ The FM setting is also shown on the TV display.
If noise is excessive
Press and hold [PLAY MODE]9 to display "MONO".
To cancel the mode, press and hold the button again until "AUTO ST" is
displayed.
≥ The mode is also cancelled when you change the frequency.

Manual tuning

1
Press [RADIO]4 to select "FM".
2
Press [SEARCH6, SEARCH5]? to select the
frequency.
≥ To start auto tuning, press and hold [SEARCH6,
SEARCH5]? until the frequency starts scrolling. Tuning stops
when a station is found.
Presetting stations manually
Up to 30 stations can be set.
1 While listening to the radio broadcast
Press [OK]8.
2 While the frequency is flashing on the display
Press the numbered buttons to select a channel.
≥ To select a 2-digit number
e.g. 12: [S10]2 [1]
Alternatively, press [X, W]@, and then press [OK]8.
A station previously stored is overwritten when another station is stored in
the same channel preset.
10
10
§
[1] [2]
[2]

Using the START menu

You can select sound effects, desired source, change the settings, access
playback/menus, etc., by using the START menu.
1
Press [START]B to show the START menu.
≥ When using VIERA Link "HDAVI Control", the TV also turns on
when the START menu is displayed.
e.g.
below).
2
Press [3, 4]8 to select an item and press [OK]8.
≥ To exit, press [START]B.
3
Press [3, 4, 2, 1]8 to make the setting and press
[OK]8.
When "Input Selection" is selected
You can select a desired source from the menu.
≥ DVD/CD ( 12), FM RADIO (
ARC ( below), USB (
§
§ "(TV)" will appear beside "AV", "AUX" or "ARC", indicating the TV audio
setting for VIERA Link "HDAVI Control" (
When "Setup" is selected
You can change the settings for this unit. (
When "Sound" is selected
You can select sound quality settings (
Other selectable items
The items that are displayed will vary depending on the media and
source.
When a disc is loaded or an USB device is connected, you can also
access playback or menus from the START menu.
e.g. [DVD-V]
DVD/CD
When the on-screen control panel appears
e.g. [DVD-V] (when "Playback Disc" is selected from the START menu)
You can operate the playback with the indicated controls.

Selecting the source using the remote control

Press To select
[DVD]4 DVD/CD
[RADIO]4 FM (
[EXT-IN]4 Each time you press the button:
AV:
AUX:
ARC:
USB:
Confirm the audio connection to the SCART (AV), AUX or HDMI AV OUT
terminal on the main unit when you select the corresponding sources (
Reduce the volume on the TV to its minimum, and then adjust the volume of the
main unit.
D V D / C D H o m e C i n e m a
Input Selection
Setup
Sound
left), AV (
§
16)
15).
16)
12, EQ (Equaliser)).
Home Cinema
P l a y b a c k D i s c
TOP MENU(DVD)
MENU(DVD)
Input Selection
Setup
left)
For audio input through the SCART (AV) terminal.
For audio input through the AUX terminal.
For audio input through the HDMI AV OUT terminal.
( 16)
below), AUX ( below),
§
Playback/menu access
8).