Sony SMU-CM2 Operating Instructions

3-266-641-11(1) Note
This equipment has been tested and found to
comply with the limits for a Class B digital device,
Optical USB pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
Mouse
installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may
cause harmful interference to radio
Operating Instructions
communications. However, there is no guarantee
Mode d'emploi that interference will not occur in a particular
installation. If this equipment does cause harmful
Manual de instrucciones
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment
SMU-CM2/CL2
and receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is
2004 Sony Corporation Printed in China
connected.
– Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications
English
not expressly approved in this manual could void
your authority to operate this equipment.
WARNING If you have any questions about this product, you
may call; Sony Customer Information Services
To prevent fire or shock hazard, do not
Center 1-800-222-7669 or http://www.sony.com/
expose the unit to rain or moisture.
Declaration of Conformity
For customers in the U.S.A.
Trade Name : SONY
Model No. : SMU-CM2/SMU-CL2
Owner's Record
Responsible Party : Sony Electronics Inc.
The model number and the serial number are
Address : 16450 W. Bernardo Dr, San Diego, CA
located on the bottom of the mouse. Record the
92127 USA
serial number in the space provided below. Refer to
Telephone No. : 858-942-2230
this number whenever you call your Sony dealer
regarding this product.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
Model No. SMU-CM2/SMU-CL2
conditions: (1) This device may not cause harmful
Serial No.
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
- Microsoft and Windows are registered
trademarks of Microsoft Corporation in the
United States and/or other countries.
- All other names of systems and products are
trademarks or registered trademarks of their
respective owners. ™ and ® marks are omitted in
this manual.
- Copyright laws prohibit reproducing the
software supplied with this mouse or the
manual accompanying it in whole or in part, or
renting the software without the permission of
the copyright holder.
- In no event will SONY be liable for any financial
damages, or loss of profits, including claims
made by third parties, arising out of the use of
the software supplied with this mouse.
- In the event a problem occurs with this product
as a result of defective manufacturing, SONY
will replace it. However, SONY bears no other
responsibility.
- The software provided with this mouse cannot
be used with equipment other than that which
is so designated.
- Please note that, due to continued efforts to
improve quality, the specifications of the
software supplied with this mouse may be
changed without notice.
Unpacking Your Mouse Connecting the mouse
Check that the package contains before using this You can use this mouse by connecting it to the USB
product. connecting terminal of your computer.
If anything is missing, contact the Sony dealer
where you purchased this product or a Sony service Connect this mouse to the USB connecting terminal
representative serving your local area. of your computer. The mouse is recognized by your
computer, and is ready for use.
• Mouse SMU-CM2/SMU-CL2
Notes
• When you connect this mouse to your computer, or
when you start up your computer, do not move this
mouse until it is identified.
• Do not connect to a computer using a USB hub.
1
Start up your computer.
• Operating instructions (this manual)
2
Connect this mouse to the USB
connecting terminal of your computer.
Your computer automatically recognizes the
Identifying the Parts
mouse, allowing you to use it.
Notes
• Some computers may require installing an OS disk.
Wheel button In this case, follow the directions shown on your
computer.
Right button • Depending on the condition of the computer or OS,
operation of this mouse may become unstable or
impossible. In such a case, refer to
Left button
"Troubleshooting."
• After disconnecting this mouse from the USB
connecting terminal, wait about five seconds to
Specifications
reconnect it. (If you reconnect it immediately, it may
not be recognized.)
Connector
z
USB terminal
You can connect/disconnect this mouse without
Resolving power turning off the power of your computer.
800 count/inch
Supported OS
Troubleshooting
Windows ® XP Professional, Windows ® XP Home
Edition, Windows ® 2000 Professional, Windows ®
If you experience any of the following difficulties
Millennium Edition, Windows ® 98 Second Edition
while using this mouse, refer to this troubleshooting
(Manufacturer installed.)
guide to help remedy the problem. If the problem
Cord length
persists, consult your nearest Sony dealer.
Approx. 1.0 m (3 ft, 3 3 / in) (SMU-CM2)
8
1
Approx. 1.5 m (4 ft, 11 / in) (SMU-CL2)
8
My mouse does not work.
Operating temperature
The USB connector is not connected properly.
5˚C to 35˚C (41˚F to 95˚F) cAfter closing all the applications, reconnect the
Operating humidity USB connector.
(After disconnecting the mouse from the USB
20% to 80% (not condensed)
connecting terminal, reconnect it after about
Storage temperature
five seconds.)
–10˚C to 60˚C (14˚F to 140˚F)
The mouse is not recognized by your computer
Storage humidity
through the USB connecting terminal to which
10% to 90 % (not condensed)
the mouse is connected.
Dimensions
cIf your computer has more than one USB
Approx. 59 34 98 mm (2 3 / 1 3 / 3 7 / in)
connecting terminal, try connecting the mouse
8 8 8
(w/h/d) (SMU-CM2)
to other USB connecting terminals.
Approx. 65 35 113 mm (2 5 / 1 7 / 4 1 / in)
8 16 2 (After disconnecting the mouse from the USB
(w/h/d) (SMU-CL2)
connecting terminal, reconnect it after about
Mass five seconds.)
cTurn off the power of your computer while the
Approx. 70 g (2.47 oz) (including the cord) (SMU-CM2)
mouse is connected to it, then start it up again
Approx. 83 g (2.93 oz) (including the cord) (SMU-CL2)
after about 30 seconds.
(If your mouse still does not work, repeat this
Design and specifications are subject to change without
procedure several times.)
notice.
The optical reading sensor is not working
properly.
cDue to the nature of this optical mouse, do not
use the mouse on glass, a mirror, or glossy
surfaces as it will not work properly. Use the
mouse with a mouse pad, or lay something
suitable under it.
The mouse is connected through a USB hub or a
keyboard.
cConnect the mouse directly to your computer.
The USB connecting terminal is disabled by your Even if the wheel button is rotated, the zoom
computer. function does not operate.
cTry the following, using the key board or
The application does not support the zoom
another functional mouse. Double-click the
function.
[System] icon in the [Control Panel], and click
cThe zoom function cannot be used with
[Device Manager]. If [!] is displayed for the USB
applications that do not support the zoom
device icon or the mouse icon, choose [!] and
function.
click [Delete], then restart your computer.
Even while my mouse is in use, the display is
The USB connecting terminal is disabled in the
dark, or the computer enters the System Suspend
BIOS settings.
mode or the System Hibernation mode.
cCheck the BIOS settings in the default settings
Depending on the USB equipment you use,
of your computer. The USB connecting terminal
computers may enter the System Suspend mode
may have been disabled. Enable the USB
or the System Hibernation mode even while the
connecting terminal, following the manual, etc.,
USB equipment is being used.
of your computer.
cTo prevent your notebook computer from
The [Found New Hardware wizard] appears
entering these modes, change the power
when I connect this mouse to my computer.
management settings of the computer. For
Your computer has more than one USB details, refer to the manual or online manual of
connecting terminal. your notebook computer.
cThe USB equipment driver may be installed for cTouch the touchpad or press any key to exit
every port according to the computer. Click these modes.
[Cancel] on the [Found New Hardware wizard]
and reconnect the mouse to the USB connecting
terminal for which the driver is already
Precautions
installed. Otherwise, install the driver for all the
USB connecting terminals to which you wish to
CAUTION
connect the mouse.
Your health may be affected if you do not follow the
The pointer sometimes does not move even
caution below.
though the mouse works.
Prolonged use of this product may strain your wrist or
arm.
The mouse is in the auto scroll mode.
cPress the wheel button to exit this mode. If you feel any pain during use, stop immediately and
take a rest. If the pain persists, even after a prolonged
The optical reading sensor is not working
rest, consult a doctor.
properly.
cDue to the nature of this optical mouse, do not
On safety
use the mouse on glass, a mirror, or glossy
Should any solid object or liquid fall into the casing,
surfaces as it will not work properly. Use the
disconnect the USB mouse and have it checked by
mouse with a mouse pad, or lay something
qualified personnel before continuing use.
suitable under it.
On placement
Nothing happens when I press the buttons of the
Do not place the USB mouse in a location where it is:
mouse.
• On an unstable surface
The USB connector is not connected properly.
• On a rug or carpet
cAfter closing all the applications, reconnect the
• In very humid areas, or where there is no ventilation
USB connector.
• Subject to excessive dust
This mouse does not support the OS of your
• Subject to direct sunlight or extreme heat
computer.
• Extremely cold
cUse an OS that this mouse supports.
• In a car with the windows closed.
The scrolling features do not work
On operation
This mouse does not support the OS of your
If the USB mouse is brought directly from a cold to a
computer.
warm location, or is placed in a very damp room,
cUse an OS that this mouse supports.
moisture may condense on the inside of the mouse. If
An application that does not support the
this occurs, the mouse may not work properly.
scrolling features is open.
In this case, wait about 30 minutes for the moisture to
cSome applications do not support the scrolling
evaporate. If the mouse does not work properly after
features.
one hour, consult your nearest Sony dealer.
Pointer speed cannot be set on a notebook
computer.
Sony is exempt from responsibility for any malfunction
Priority is given to the pointing device built into
or other problem caused as a result of using this mouse.
the notebook computer. Therefore, it may not be
possible to set up with a USB-connected mouse.
The mouse property settings are disabled.
More than one mouse is connected to the USB
connecting terminals.
cDisconnect all mice other than this one.
Utility driver software for another mouse is
installed.
cUninstall the utility driver software and then
restart your computer. The operating system's
mouse property settings become effective. For
details about uninstalling, refer to the manual,
etc., of your utility driver software.
(A touchpad function may be disabled when
you use a notebook computer.)
Français
Identification des
éléments de la souris
AVERTISSEMENT
Pour prévenir tout risque d'incendie ou
Bouton molette
d'électrocution, garder cet appareil à
l'abri de la pluie et de l'humidité.
Bouton droit
- Microsoft et Windows sont des marques déposées
de Microsoft Corporation aux États-Unis et/ou
dans d'autres pays.
- Tous les autres noms de systèmes et de produits
sont des marques de commerce ou des marques
Caractéristiques
déposées de leurs propriétaires respectifs. Les
symboles ™ et ® ne sont pas utilisés dans le techniques
présent mode d'emploi.
Connecteur
- Les lois sur les droits d'auteur interdisent la
Borne USB
reproduction du mode d'emploi et du logiciel
fournis avec cette souris, en tout ou en partie, Pouvoir de résolution
ainsi que la location du logiciel, sans
800 cpi
l'autorisation du détenteur des droits d'auteur.
- SONY ne peut en aucun cas être tenu Systèmes d'exploitation pris en charge
responsable de quelque dommage financier ou
Windows ® XP Professionnel, Windows
perte de profits que ce soit, y compris des
familiale, Windows ® 2000 Professionnel, Windows
réclamations faites par des tiers, survenant à la
Millennium Edition, Windows ® 98 Deuxième Edition
suite de l'utilisation du logiciel fourni avec (Installé par le fabricant.)
cette souris.
Longueur du cordon
- Si un problème lié au produit survient suite à
un défaut de fabrication, SONY s'engage à le Environ 1,0 m (3 pi 3 3 / po) (SMU-CM2)
8
remplacer. Toutefois, SONY n'accepte aucune Environ 1,5 m (4 pi 11 1 / po) (SMU-CL2)
8
autre responsabilité.
Température de fonctionnement
- Le logiciel fourni avec cette souris ne peut pas
être utilisé avec des appareils autres que ceux 5 °C à 35 °C (41 °F à 95 °F)
Humidité de fonctionnement
désignés pour une utilisation avec cette souris.
- Veuillez noter que, suite à des efforts continus
20 % à 80 % (non condensée)
pour améliorer la qualité, les caractéristiques
Température d'entreposage
techniques du logiciel fourni avec cette souris
–10 °C à 60 °C (14 °F à 140 °F)
sont sujettes à modification sans préavis.
Humidité d'entreposage
10 % à 90 % (non condensée)
Dimensions
Environ 59 34 98 mm (2 3 / 1 3
Déballage de votre
8
(l/h/p) (SMU-CM2)
Environ 65 35 113 mm (2 5 / 1
souris
8
(l/h/p) (SMU-CL2)
Vérifiez que l'emballage contient les éléments cités
Masse
ci-dessous.
Environ 70 g (2.47 oz) (y compris le cordon) (SMU-CM2)
S'il manque l'un de ces éléments, contactez le
Environ 83 g (2.93 oz) (y compris le cordon) (SMU-CL2)
détaillant Sony auprès duquel vous avez acheté ce
produit ou le représentant du service après-vente
La conception et les caractéristiques techniques sont
Sony de votre région.
sujettes à modification sans préavis.
• Souris SMU-CM2/SMU-CL2
Raccordement de la
souris
Vous pouvez utiliser cette souris en la raccordant à
la borne de raccordement USB de votre ordinateur.
• Mode d'emploi (le présent document)
Raccordez cette souris à la borne de raccordement
USB de votre ordinateur. La souris est détectée par
votre ordinateur et est prête à l'emploi.
Remarques
• Lorsque vous raccordez cette souris à votre
ordinateur ou lorsque vous démarrez votre
ordinateur, ne déplacez pas cette souris avant qu'elle
ait été identifiée.
• Ne raccordez pas la souris à un ordinateur à l'aide
d'un concentrateur USB.
Bouton gauche
® XP Edition
®
/ 3 7 / po)
8 8
7 / 4 1 / po)
16 2
Voir au verso.