Samsung SLB-1437A KIT User Manual

Identification of features
ID Terminal
Positive (+)
(-) Terminal
Terminal
Negative (-)
Terminal (+) Terminal
ID Terminal
Charge Indicator
[ Battery Charger & Battery ]
Using the Battery Charger
With the AC cord
1. Insert the AC cord into the charger. 2. Plug the AC cord's power plug into the wall
outlet.
Notice
When power is supplied to the charger, the charge indicator will illuminate for 1
second. (Orange Color)
6
Charging the Li-ion Battery (SLB-1437)
3. Align the (+) and (-) markings on the battery with the charger's
(+) and (-) terminals, and slide the battery into the slot until it
clicks into place. The charge indicator illuminates as red and
charging begins. When the battery is fully charged, the charge
indicator turns green.
Notice
If the charge indicator illuminates as green when you insert the battery, your
battery is already charged to full capacity and cannot be charged any longer.
If the charge indicator blinks as red, it indicates a battery charging error.
- If the battery is not properly inserted
- If the 3 terminals (+, -, and ID) are dirty or damaged
If the battery is inserted properly and the charge indicator continues to flash,
contact the nearest Samsung Camera Service Center.
Memo
7
SAMSUNG CAMERA
User Manual
Digimax Power Pack
SLB-1437A KIT
ENGLISH
Thank you for purchasing the Samsung Digimax Power Pack. This manual contains important
safety and operating instructions for your power pack. Be sure to read and understand the
instructions before using your power pack.
Specifications
Cell Type Li-ion Cell
Li-ion Battery Cell Capacity 1,440mAh
(SLB-1437)
Voltage 3.7V
Charging Time Approximately 150 Minutes
Input AC 100-250V/ 50-60Hz
Battery Charger
Output Li-ion : 4.2V 0.82A
(SBC-L2)
Rechargeable Battery Type SLB-1437 Li-ion Battery
Specifications are subject to change without prior notice.
Safety Instructions
Be sure to read this manual carefully before using your power pack.
Keep this manual handy for future reference.
6806-2227