Samsung R408 plus User Manual page 62

Mini SD and RS-MMC
Since the above cards are too small, you
cannot insert the cards into the slot directly.
Insert the card into the dedicated adapter
(available from most electronic retailers) and
then insert the adapter into the multi card slot.
However, depending on the adapter's body
material, some RS-MMC cards may not be
recognized properly.
Samsung recommend that you check the card
is recognized correctly prior to purchasing.
To remove a memory card
1
Take hold of the end of the card and remove the
card.
To format a memory card
When using a memory card for the first time, you must
format the card before using it.
The following are the procedures to format a memory
card in Windows Vista. For the Windows XP procedures,
refer to the following as the procedures are similar.
Formatting a card deletes all data saved on the
card. If the card includes data, backup the data
before formatting it.
1
Click Start > Computer.
2
Right-click over a card drive with the touchpad and
select Format.
3
Click Start to the formatting.
 To use a card to exchange data with a
digital device such as a digital camera,
formatting the data using the digital device
is recommended.
 When you try to use a card, which is
formatted in the computer, in another digital
device, you may have to format the card
again in the device.
 You cannot format, write or delete data from
a SD, or SDHC card with a write protection
tab when it is in the Lock position.
 Inserting and removing a memory card
repeatedly may damage the memory card.
2