Selecting The Cassette Type; Selecting The Recording Speed (Sv-H620K/Sv-H80K Only); Nicam (Sv-H620K Only) - Samsung SV-H620K Instruction Manual

01823S SV-H620K/DIN-GB2 3/21/03 4:51 PM

Selecting the Cassette Type

If you wish to use the tape counter to display the time remaining on
a cassette, you must indicate the type of cassette inserted.
PROG OPTIONS OPTIONS INSTALL
CLOCK BONUS LANG
USER SET
➛❿¤¤
œ ❷¤¤ OK END: MENU
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
IPC :ON
GB
❿
œ ❷ END: MENU

Selecting the Recording Speed (SV-H620K/SV-H80K Only)

You can record a cassette at two different speeds:
Type Recording Time (in SP)
E-180 180 mins. or 3 hours
E-240 240 mins. or 4 hours In Long Play modes:
E-260 260 mins. or
4 hours and 20 mins.
E-300 300 mins. or 5 hours
To record a cassette...
In standard play mode
SPEED DUB TV/VCR TIMER
In long play mode
24
Page 24
1
Press MENU on the remote control.
Result: The programming menu is displayed.
or ➛, ❿ buttons to select the
2
Press the corresponding œ , ❷¤
USER SET option.
3
Press the OK button to select this option.
4 Press the corresponding or buttons, until the
œ ❷
option is selected.
SELECT
Press the ➛ or ❿ buttons as many times as required, until the
5
correct cassette length is displayed.
E180 E240
E 300 E260
6 Press MENU twice to exit the menu.
SP (Standard Play)
LP (Long Play)
Each cassette lasts twice as long
The recording is of a slightly lower quality
Press the SPEED button on the
remote control, until...
SP is displayed.
LP is displayed.

NICAM (SV-H620K Only)

NICAM programmes are divided into 3 types. NICAM Stereo,
NICAM Mono and Bilingual (transmission in another language).
NICAM programmes are always accompanied by a standard mono
sound broadcast and you can select the desired sound.
Please refer to page 33.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding ,
œ ❷¤
USER SET option.
TAPE
3
Press the OK button to select this option.
Result: The USER SET menu is displayed.
4
Press the corresponding œ or
is selected.
Press ➛ or ❿, until...
5 To...
Mono mode OFF is displayed.
OFF : Only set at this position to record the
standard mono sound during a
NICAM broadcast if the stereo
sound is distorted due to inferior
reception conditions.
NICAM mode is displayed.
ON
ON : Normally set at this position.
6
On completion, press MENU twice to exit the menu.
PROG OPTIONS OPTIONS
CLOCK BONUS
USER SET
or ➛, ❿ buttons to select the
➛❿¤¤
œ ❷¤¤ OK
OPTIONS
❷ buttons, until the NICAM option
OSD
TAPE SELECT
COLOUR SYSTEM
FORMAT 16:9
NICAM
IPC
❿
œ ❷
INSTALL
LANG
END: MENU
:ON
:E180
:AUTO
:AUTO
:ON
GB
:ON
END: MENU
25