Transfer Function - Sharp UX-BS60 Operation Manual

3
Press .
4
Press to turn on OGM only mode,
or to turn it off.
5
Press to return to the date and time display.

Transfer Function

The Transfer function is used to have the machine automatically call you at a
specified number every time it receives an incoming message. This lets you
hear your messages immediately after they come in, even when you are at a
remote location.
To use the Transfer function, you must first program the number that you wish
the machine to call (the transfer number), and record the transfer message
that plays when you answer the phone at the remote location.
When you go out and wish to use the transfer function, turn it on. When you
return and no longer wish to use the transfer function, turn it off.
Programming the transfer number
To use the Transfer function, you must first program the number to call (the
transfer number).
1
Press once and
2
Press once and
3
Press .
once. Display:
4 times.
Transfer Function
OGM ONLY MODE
1=YES, 2=NO
The display briefly shows
your selection, then:
TOLL SAVER
A.M. SETTING
TRANSFER TEL #
ENTER TEL #
55