Priority Call - Sharp UX-108 Operation Manual

3
If you want to dial one of the numbers in
the list, scroll through the list until the
number appears in the display.
• • • • If you want to send a fax, load the
document and then press the START
key.
• • • • If you want to make a voice call, pick
up the handset or press the SPEAKER
key. Dialing will begin automatically.
(If you pressed the SPEAKER key,
pick up the handset when the other
party answers.)
4
Press the STOP key when you have
finished viewing the list.
To delete calls from the Caller ID list
If you want to delete a single call from the caller list, press the 0 key while
the call appears in the display. If you want to delete all calls from the list,
hold the 0 key down for at least 3 seconds while you are viewing any number
in the list.

Priority Call

If desired, you can set your fax to make a special ringing sound when you
receive a call from a designated phone number. This lets you know
immediately who is calling without having to look at the display. To use this
function, enter the desired phone number by following the steps below (only
one phone number can be entered).
1
Press the keys shown at right.
PRIORITY CALL # will appear in the
display.
START
STOP
FUNCTION
3
Caller ID
51