Audio Menu; Surround - Sharp LB-1085 Operation Manual

On-Screen Display Menu
I/P Setting
Converts input signals depending on the type of
images.
Fast: Suitable for fast-moving images
Slow: Suitable for smooth images with low amounts
of flickers
• "I/P Setting" is not selectable when channel display
shows an input resolution of 480P, 720P, or 1080P.
Film Mode (3:2 pull-down)
Automatically detects a film-based source (originally
encoded at 24 frames/second), analyzes it then
recreates each still film frame for high-definition
picture quality.
On: Detects, analyzes, converts film source.
Off: Normal viewing mode.
• "Film Mode" does not function when you set the "AV
Mode" to "Game".
• "Film Mode" is not selectable when channel display
shows an input resolution of 480P, 720P, or 1080P.
Digital Noise Reduction
Produces a clearer video image.
Off: No adjustment
High: For enhanced Digital Noise Reduction
Low: For moderate Digital Noise Reduction
3D-Y/C
Provides high quality images with minimal dot crawl
and cross color noise.
Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.
Off (2D): For Game Mode.
• 3D-Y/C is available for input signal from Composite
Video.
Monochrome
For viewing a video in monochrome.
On: For viewing in monochrome.
Off: Normal color.
Range of OPC
The brightness level range of the OPC sensor's
automatic adjustments can be set according to your
preferences.
The adjustment range of the OPC sensor can be
set to a maximum of +16 and a minimum of –16.
Max.: –15 through +16
Min.: –16 through +15
• The range of OPC settings are active only when the
OPC is set to "On".
• The maximum setting cannot be set to a smaller
number than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• Depending on the brightness of the surrounding light,
the OPC sensor might not operate if the adjustment
range is small.
24

Audio Menu

You can adjust the sound quality to your preference
with the following settings.
Example
Audio
Treble [ 0] -15
Bass [ 0] -15
Balance [ 0] L

Surround

Reset
1
Press MENU to display the MENU screen, and
then press / to select "Audio".
2
Press / to select a specific adjustment
item.
• Select "Surround" and then press
the item.
3
Press / (or /
setting, and then press ENTER.
4
Press MENU to exit.
Selected item button
Treble For weaker treble For stronger treble
Bass For weaker bass
Balance Decrease audio
from the right
speaker
• Audio menu is grayed out when Output Select is set to
"Variable".
• For resetting all Audio adjustment items to the factory
preset values, press /
ENTER, press
/ to select "Yes", and then press
ENTER.
Surround
Surround function allows you to enjoy realistic "live"
sound.
On: Surround function is on.
Off: Normal sound.
• Audio menu is grayed out when Output Select is set to
"Variable".
• For some discs, setup may be required on your DVD
player. In this case, please refer to the operation
manual of your DVD player.
+15
+15
R
[Off]
ENTER to set
) to select the desired
button
For stronger bass
Decrease audio
from the left
speaker
to select "Reset", press