Crossover Network - Pioneer VSX-908RDS-G Operating Instruction

Crossover Network

The following steps show you how to adjust the crossover network. The crossover network is the frequency at
which the system divides the signal and sends the different parts (high ,mid, low) to different speakers.
Speaking precisely, this setting sets the cutoff point for the bass frequencies rerouted from your SMALL
speakers to your sub woofer or speakers set to LARGE. Setting speakers to SMALL in "Speaker Setting" sends
the respective channel's bass frequencies to the sub woofer (or LARGE speakers). If continuing from Channel
Level, go to step 1. If starting fresh, complete steps 1-3 in "Setting Up for Surround Sound" (p.25-26) first.
S0URCE RECEIVER
MULTI SYSTEM
OPERATION OFF
DVD/LD TV/SAT VCR1
MULTI CONTROL
MD/
CD TUNER
TAPE1
CLASS MPX BAND DIRECT ACCESS
¶ 7 3
- + -
TUNING STATION
1 ¡ 4
-
CHANNEL
1 2
4 5
7 8
+10 0
RF ATT
TV
TV VOL TV CONTROL VOLUME
TV FUNC
EFFECT
MENU
/CH SEL
1-3
ENTER
2/dts
SYSTEM
THX ADVANCED
SETUP
REMOTE
MIDNIGHT DSP
SETUP
AV PREPROGRAMMED AND LEARNING
REMOTE CONTROL UNIT
1
Select Crossover Network (if continuing from Channel
Î
Level, it will already be selected) and press the ENTER
button.
VCR2
See "Setting Up for Surround Sound" on page 25-26 if you are
TV CONT
8
unsure how to do this.
+
¢
+
3
6
9
DISC
DISPLAY
MUTE
FUNCTION
The default setting is 80 Hz.
SIGNAL
SELECT
2
Select the crossover frequency for your small speakers
STANDARD
MPEG
with the 2/3 buttons, and press the
STEREO
DIGITAL NR
Setting speakers to SMALL in "Speaker Setting" sends the
respective channel's bass frequencies to the sub woofer (or LARGE
speakers).
80 Hz
Sends bass frequencies below 80 Hz to the sub woofer (or LARGE
speakers).
100 Hz
Sends bass frequencies below 100 Hz to the sub woofer (or
LARGE speakers).
150 Hz
Sends bass frequencies below 150 Hz to the sub woofer (or
LARGE speakers).
As noted on your TV screen the THX setting is 80. Select this
setting if you have THX approved SMALL speakers.
Experiment with the different settings to see which sounds best to
you.
3 Select EXIT with the 5¥
ENTER button to return to the System Setup menu.
Next, proceed to Bass Peak Level Manager on the next page.
If you want to change a setting before proceeding
Simply use the 5¥
go back.
Surround Sound Set Up
Crossover Network
Frequency [ 80Hz ]
(THX Speaker = 80Hz)
[EXIT]
buttons and press the
buttons before pressing the ENTER button to
button.
31