Panasonic KX-TG8070FX Operating Instructions Manual page 34

TG8070-8090FX(e-e).book Page 34 Wednesday, August 1, 2007 9:26 AM
Useful Information
Answering system (KX-TG8090)
Problem
The unit does not record new
messages.
I cannot operate the answering system
with the handset or the base unit.
I cannot operate the answering system
remotely.
While recording a greeting message or
listening to messages, the unit rings
and recording stops.
The call screening setting turns "On" or
"Off" even though I set it differently.
For DSL users
We recommend connecting a filter (contact your DSL service provider) to the telephone line between the
base unit and the telephone line jack.
34
Cause & solution
L The answering system is turned off. Turn it on (page 23).
L If you subscribe to the voice mail service, messages are
recorded by your service provider/telephone company not
your telephone. Change the unit's "Number of Rings"
setting or consult your service provider/telephone
company (page 26).
L The base unit or another handset is being used. Wait for
the other user to finish.
L A caller is leaving a message. Wait for the caller to finish.
L The handset is too far from the base unit. Move closer.
L You are entering the wrong remote access code. If you
forget the remote access code, store a new remote
access code (page 25).
L Press each key firmly.
L The answering system is turned off. Follow the steps in
"When the answering system is off", page 25.
L You are using a rotary/pulse telephone. Try again using a
touch-tone phone.
L Remote operation is not available unless you change the
remote access code from the default setting ("0000").
Change the remote access code.
L A call is being received. Answer the call and try again
later.
L You pressed {^} or {V} when screening a call or when the
base unit was in standby mode. Set the call screening
setting again (page 26).