Network Settings; Location And Time Zone; Language; Device Information - Philips Streamium NP3500/12 User Manual

3
In [Date and time], select [Current date
and time] > [Manual].
4
To enter date and time,
• Press or
location;
• Use the alphanumeric buttons to
enter desired digits;
• Press OK to confirm.
• You can also press
repeatedly, or press and hold
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1
Follow Step 1-2 under "Manual setting".
2
In [Date and time], go to [Time format]
or [Date format] to select options.

Network settings

Setup network
After the first-time setup, you can change
how NP3500 connectsto home Wi-Fi/wired
network:
• Switch between different connection
methods (wireless or wired,
automatic or manual);
• Switch between different routers.
To do so, do the following:
1
From Home screen, go to [Settings] >
[Network settings] > [Setup network].
• Or, press SETTINGS on the remote
control to enter [Settings].
2
Connect NP3500 as you did in the
first-time setup (see 'First-time setup'-
>'Connect to home Wi-Fi/wired
network').
to select the entry
or
or
Device name
In [Device name], you can name/rename your
NP3500. On a connected UPnP server/client,
the NP3500 can be found as named.
1
From Home screen, go to [Settings] >
[Network settings] > [Device name].
2
In [Device name], press
the entry location; press
to select desired letters.

Location and time zone

After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
According to the selected location and time
zone, NP3500 can
• Set clock automatically over the
Internet (see 'Settings'->'Date and
time');
• Pre-load preset Internet radio
stations automatically.

Language

After the first-time setup, you can change the
language selection in [Settings] > [Language].

Device information

From the home screen, go to [Settings] >
[Device ID and information]. You can learn
about information about NP3500, including
model number, name to be shown on a UPnP
server/client, software version and network
settings.
/ to select
/ repeatedly
EN 35