Panasonic TH-50PH30E Operating Instructions Manual page 27

Setup of Screensaver Time
After selecting Interval or Standby after SCR Saver, the relevant Time Setup will become available for selection and
the Operating Time may be set. (Time cannot be set when "Mode" is "On" or "Off".)
Notes:
• Pressing " " or " " button once changes the Time 1 minute.
[However, switching occurs every 15 minutes when Periodic Time is selected.]
• Pressing " " or " " button continuously changes the Time by 15 minutes.
• "Screensaver duration" of the "Standby after SCR Saver" can be set from 0:00 to
23:59. When this is set to "0:00", " Standby after SCR Saver" will not be activated.
Screensaver (For preventing image retention)
Press to select Periodic Time / Operating Time
(When Interval is selected).
Press to select Screensaver duration
(When Standby after SCR Saver is selected).
Press to setup.
button: Forward
button: Back
Screensaver
Start
Scrolling bar only
Function
Interval
Mode
12:00
Periodic Time
3:00
Operating Time
Screensaver
Start
Function Scrolling bar only
Standby after SCR Saver
Mode
Screensaver duration 6:15
27