TCD210G(e-g).book Page 1 Friday, January 14, 2005 1:42 PM Operating Instructions Digital Cordless Phone KX-TCD210G Model No. This unit is compatible with Caller ID and SMS. To use these features, you must subscribe to the appropriate service of your service provider.
Page 2
L In the event of problems, you should contact your equipment supplier in the first instance. Declaration of Conformity: L Panasonic Communications Co., Ltd. declares that this equipment is in compliance with the essential requirements and other relevant provisions of Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
TCD210G(e-g).book Page 3 Friday, January 14, 2005 1:42 PM Feature highlights Feature highlights Phonebook The phonebook allows you to make calls without having to dial manually. You can add 200 names and phone numbers to the phonebook, assign each phonebook entry to the desired category, and search for phonebook entries by name or category.
TCD210G(e-g).book Page 6 Friday, January 14, 2005 1:42 PM Preparation – Away from electrical appliances such as Important information TVs, radios, personal computers or other phones. – In a convenient, high and central location. General L Use only the AC adaptor included with this Battery caution product, noted on Seite 5.
TCD210G(e-g).book Page 7 Friday, January 14, 2005 1:42 PM Preparation Hinweis: Controls and displays L Up to 3 menu items can be displayed at a time. To select a menu item not shown on the current page, scroll up or down by pressing the Controls navigator key, {e} or {v}, respectively.
TCD210G(e-g).book Page 8 Friday, January 14, 2005 1:42 PM Preparation Display icon Meaning Connections Voice enhancer is set to high [VE] When the AC adaptor is connected, a short beep or low tone. (Seite 12) will be heard. If it is not heard, check the Night mode is on.
TCD210G(e-g).book Page 9 Friday, January 14, 2005 1:42 PM Preparation When the batteries are fully charged, 5 Battery installation remains on the display. Insert the batteries negative (T) terminal first. Close the handset cover. Hinweis: L It is normal for the handset to feel warm during charging.
TCD210G(e-g).book Page 10 Friday, January 14, 2005 1:42 PM Preparation Battery life Turning the power on/off After your Panasonic batteries are fully charged, you can expect the following performance: Power on Ni-MH batteries (700 mAh) Press {ih} for about 1 second.
TCD210G(e-g).book Page 11 Friday, January 14, 2005 1:42 PM Making/Answering Calls To make a call using the redial list Making calls The last 10 phone numbers dialled are stored in the redial list. Lift the handset and dial the phone number. L To correct a digit, press {C/T}, then enter Press {R}.
TCD210G(e-g).book Page 12 Friday, January 14, 2005 1:42 PM Making/Answering Calls Select “Löschen”, then press {>}. answered, but all other functions are disabled while key lock is on. L If you want to erase all numbers in the list, To turn key lock on, press {j/OK} for about 2 select “Alle löschen”, then press {>}.
TCD210G(e-g).book Page 13 Friday, January 14, 2005 1:42 PM Making/Answering Calls Answering calls Lift the handset and press {C} or {s} when the unit rings. L You can also answer a call by pressing any dial key from {0} to {9}, {*}, {#}, or {INT}. (Any key answer feature) When finished talking, press {ih} or place the handset on the base unit.
TCD210G(e-g).book Page 14 Friday, January 14, 2005 1:42 PM Phonebook Changing category names Using the phonebook Press {k}, then press {j/OK}. The phonebook allows you to make calls without Select “Kategorie”, then press {>}. having to dial manually. You can add 200 names Select the category you want to change the and phone numbers to the phonebook, assign name of, then press {>}.
TCD210G(e-g).book Page 15 Friday, January 14, 2005 1:42 PM Phonebook Select “Kategoriesuche”, then press One touch dial {>}. Select the category you want to search, then Assigning an entry in the phonebook to a one press {>}. touch dial key L The first entry in that category is Dial keys {1} to {9} can each be used as a one displayed.
Phonebook entries (Seite 14) can be copied from desired entry. the handset to the phonebook of a compatible L To search by first character (index search), Panasonic handset. see Seite 14. To search by category, see Seite 14. Copying one entry Press {>} to dial the number.
TCD210G(e-g).book Page 17 Friday, January 14, 2005 1:42 PM Handset Settings Guide to handset settings For your reference, a chart of all items which can be customised for the handset is printed below. L When customising the handset, the current item or setting is indicated by >. Handset settings Sub-menu Sub-menu 2...
TCD210G(e-g).book Page 18 Friday, January 14, 2005 1:42 PM Handset Settings Select “Mobilteileinst.”, then press Time settings {>}. Select “Ruftoneinstell.”, then press Alarm {>}. Select “Ruflautstärke”, then press {>}. An alarm will sound for 3 minutes at the set time Press {e} or {v} repeatedly to select the once or daily.
Page 19
TCD210G(e-g).book Page 19 Friday, January 14, 2005 1:42 PM Handset Settings sleeping. Night mode can be set independently Setting the ring delay for night mode for the handset and the base unit (Seite 23). This setting allows the handset to ring during Using the phonebook’s category feature (Seite night mode if the caller waits long enough.
TCD210G(e-g).book Page 20 Friday, January 14, 2005 1:42 PM Handset Settings Changing the display contrast Display setup Press {j/OK}. Selecting the standby mode display Select “Mobilteileinst.”, then press {>}. “Basis Kennung”: The current base unit Select “Display-Einst.”, then press number is displayed. “Mobilt.-Nr.”: The current handset number is {>}.
Resetting the handset to its default your new PIN. The unit will not reveal the PIN settings to you. If you forget your PIN, consult your nearest Panasonic service centre. Press {j/OK}. Press {j/OK}. Select “Mobilteileinst.”, then press Select “Mobilteileinst.”, then press {>}.
TCD210G(e-g).book Page 22 Friday, January 14, 2005 1:42 PM Base Unit Settings Guide to base unit settings For your reference, a chart of all items which can be customised for the base unit is printed below. L When customising the base unit, the current item or setting is indicated by >. Base unit settings Sub-menu Sub-menu 2...
TCD210G(e-g).book Page 23 Friday, January 14, 2005 1:42 PM Base Unit Settings L If you use 12-hour time entry, select “AM” Ringer setup or “PM” by pressing {*} repeatedly before entering the time. Press {j/OK}. Ringer volume Press {ih}. Press {j/OK}. Select “Basis-Einstell.”, then press Turning night mode on/off {>}.
TCD210G(e-g).book Page 24 Friday, January 14, 2005 1:42 PM Base Unit Settings L If the memory location already contains an Call options emergency number, the number is displayed. Enter/edit the number, then press {j/OK}. Changing the recall time L To erase an emergency number, press and Change the recall time, if necessary, depending hold {C/T}.
Page 25
TCD210G(e-g).book Page 25 Friday, January 14, 2005 1:42 PM Base Unit Settings L If the location already contains a carrier Setting call restriction code, the code is displayed. You can restrict selected handsets from dialling Enter the carrier code (7 digits max.), then certain numbers.
If you select “Österreich” in step 6 by to you. If you forget your PIN, consult your mistake, repeat this procedure and select nearest Panasonic service centre. “Deutschland” in step 6. Press {j/OK}. L After resetting the base unit, you will not be Select “Basis-Einstell.”, then press...
TCD210G(e-g).book Page 27 Friday, January 14, 2005 1:42 PM Caller ID Service Category features for Caller ID Using Caller ID service subscribers Wichtig: Categories can help you identify who is calling by L This unit is Caller ID compatible. To use Caller using different ringtones for different categories ID features (such as displaying caller phone of callers.
TCD210G(e-g).book Page 28 Friday, January 14, 2005 1:42 PM Caller ID Service Press {C} or {s} to call back the displayed party. Editing a caller’s phone number before calling back Press {j/OK}. Select “Anruferliste”, then press {>}. Press {e} or {v} repeatedly to display the desired entry.
TCD210G(e-g).book Page 29 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) Enter “0000” (default base unit PIN). Using SMS (Short Message L If you changed the PIN, enter it (Seite 26). Select “SMS Ein/Aus”, then press {>}. Service) Select “Ein”...
TCD210G(e-g).book Page 30 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) 2, store the Message Centre 1 phone number If you do not enter the other party’s mailbox as is, without adding a line access number or number, the message will be sent to the dialling pause.
TCD210G(e-g).book Page 31 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) To send the message, press {j/OK}, select Receiving a message “Senden”, then press {>}. Press and hold {C/T} to erase all numbers, When an SMS message is received: then continue from step 6, “Writing and –...
TCD210G(e-g).book Page 32 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) Edit the destination phone number and/or Guide to SMS settings press {j/OK}. Continue from step 7, “Writing and sending a If the base unit is reset to its default settings new message”, Seite 30.
Page 33
TCD210G(e-g).book Page 33 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) Hinweis: Select “Einstellungen”, then press {>}. L To receive SMS messages using a mailbox, Enter “0000” (default base unit PIN). inform others of your mailbox number. L If you changed the PIN, enter it (Seite 26). Select “TK-Anlagen-Nr.”, then press Changing private mailbox settings {>}.
TCD210G(e-g).book Page 34 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) Available character entries for SMS Wichtig: L For character entry when entering the name for phonebook, etc., see Seite 40. The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it.
Page 35
TCD210G(e-g).book Page 35 Friday, January 14, 2005 1:42 PM SMS (Short Message Service) Alphabet character table (ABC) Numeric entry table (0-9) Greek character table (M) Extended character table (N) L The following are used for both uppercase and lowercase:...
TCD210G(e-g).book Page 36 Friday, January 14, 2005 1:42 PM Multi-unit Operation Lift the additional handset and press {ih} Operating additional units to put the handset in standby mode. Press and hold {x} on the base unit for about 3 seconds, until the registration tone Additional handsets sounds.
You can increase the range of the base unit by Enter “335”. using a DECT repeater. Please use only the Select “Mobilt. Löschen”, then press Panasonic DECT repeater noted on Seite 5. {>}. Consult your Panasonic dealer for details. L The numbers of all handsets registered to Wichtig: the base unit are displayed.
TCD210G(e-g).book Page 38 Friday, January 14, 2005 1:42 PM Multi-unit Operation L If you changed the PIN, enter it (Seite 26). To complete the call transfer, press {ih}. To establish a conference call, press {3}. Select “Andere Optionen”, then press {>}.
TCD210G(e-g).book Page 39 Friday, January 14, 2005 1:42 PM Useful Information Wall mounting 60 mm Screws Hooks Hinweis: L Make sure the screws are securely fastened to the wall. L Do not pinch the telephone line cord and AC adaptor cord between the base unit and the wall. L Use the following wall template to position the screws before drilling.
TCD210G(e-g).book Page 40 Friday, January 14, 2005 1:42 PM Useful Information Available character entries Wichtig: L For character entry when writing SMS messages, see Seite 34. The dial keys are used to enter characters and numbers. Each dial key has multiple characters assigned to it.
Page 41
TCD210G(e-g).book Page 41 Friday, January 14, 2005 1:42 PM Useful Information Numeric entry table (0-9) Greek character table (M) Extended 1 character table (N) L The following are used for both uppercase and lowercase: Extended 2 character table (O) L The following are used for both uppercase and lowercase:...
Page 42
TCD210G(e-g).book Page 42 Friday, January 14, 2005 1:42 PM Useful Information Cyrillic character table (P)
TCD210G(e-g).book Page 43 Friday, January 14, 2005 1:42 PM Useful Information Troubleshooting If you still have difficulties after following the instructions in this section, disconnect the AC adaptor and turn off the handset, then reconnect the AC adaptor and turn on the handset. Initial settings Problem Cause &...
Page 44
TCD210G(e-g).book Page 44 Friday, January 14, 2005 1:42 PM Useful Information Telephone Problem Cause & solution I cannot make or receive calls. L The AC adaptor or telephone line cord is not connected. Check the connections. L If you are using a splitter to connect the unit, remove the splitter and connect the unit to the wall socket directly.
Page 45
Cancel unused handset registrations from the base unit (Seite 37). L You entered the wrong PIN number. If you forget your PIN, consult your nearest Panasonic service centre. L Locate the handset and the base unit away from other electrical appliances.
TCD210G(e-g).book Page 46 Friday, January 14, 2005 1:42 PM Useful Information Provision of frequencies for general use Specifications I Standard: DECT (Digital Enhanced Cordless Telecommunications), GAP (Generic Access Profile) I Number of channels: 120 Duplex Channels I Frequency range: 1.88 GHz to 1.9 GHz I Duplex procedure: TDMA (Time Division Multiple Access) I Channel spacing:...
TCD210G(e-g).book Page 50 Friday, January 14, 2005 1:42 PM Index Settings: 17 Index Intercom: 38 K Key lock: 12 A Alarm: 18 Keytones: 21 Answering calls: 13 L LetterWise: 21, 34, 40 ARS (Automatic Route Selection): 24 M Making calls: 11 Area codes: 25 Missed calls: 27 Carrier codes: 24...
Page 52
3 Ping Xi 8 Lu, Nanping Keji Gongye Yuan, Zhuhai, Guangdong, China 519060 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd.