■
To edit a timer programming event
Select the event
●
To change a timer programming event
●
To delete a timer programming event
(red)
■
To unlock the tuner and stop recording
Note
●
Check that the LED is orange. If not, timer programming events are not active or not stored.
●
Timer Programming reminder messages will remain displayed until one of the following occurs:
You press the OK button to view the programme or the EXIT button to cancel the reminder.
•
The timer programming event that the reminder is set for ends.
•
●
"!" identifies that two or more timer programming events are overlapped. [Ext Rec.] is given priority over [Reminder].
As for the overlapped recording events, the first event starts and finishes as programmed. The next event can then
start.
●
The recording of Timer Programming will automatically change to the programmed channel a few seconds before the
start time.
●
To stop recording the timer programming event, it may be necessary to stop the recorder manually.
●
The recording of Timer Programming will be performed even if the TV is in [Pause Live TV] recording (p. 84). In this
case, [Pause Live TV] recording will be cancelled.
54
Correct as necessary (p. 53)
●
To record with subtitles (if available)
Each time pressed:
•
(yellow)
auto
●
To cancel a timer programming event temporarily
Each time pressed:
•
(blue)
cancel
off
stop cancelling