Recording Setup; Manual Recording - JVC VR-609 Instructions Manual

Hide thumbs Also See for VR-609:

Table of Contents

5.2 Recording Setup

Manual Recording is for setup recording condition of each channel as pressing REC

button when it is not recorded according to schedule.

・You can select ON/OFF of Schedule Recording by the check BOX.

You can change ON/OFF of the check BOX by pressing Enter button.

If schedule recording ON, the setting of the Manual Recording is invalid.

(Schedule Recording will be carried out.)

If you want to carry out the Manual Recording, you make sure that "Schedule

Recording" is not checked.

・Each symbol means as below.

· ●

: Always Recording.

· A

: Alarm Recording.

· M

: Motion Recording.

· fps/fps : The former 'fps' is field rate of Always Recording,

the latter 'fps' is filed rate of Alarm Recording/Motion Recording.

■ Setting procedure

1) Move the cursor on a channel selection domain on a Manual Recording screen,

and press an ENTER button.

2) Use the Up/Down buttons or jog dial to select the channel.

3) Press the ENTER button to display the Recording Events screen.

→See 5.2.1.1 Recording Events (P.47) for configuration of event recording.

Please do not set-up a channel without video input as record. Please take out all

checks, Always, alarm, and motion.

-- 46 --

VR-609

Table of Contents

Vr-616