Configuration Summary (Telecommuter Example) - NETGEAR DGN2200v3 User Manual

b. Type ping 172.23.9.1
If the pings fail the first time, try the pings a second time.

Configuration Summary (Telecommuter Example)

The configuration in this section follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather the necessary information before you begin configuration.
Verify that the firmware is up to date, and make sure you have all the addresses and
parameters to be set on both sides. Assure that there are no firewall restrictions
VPN Consortium Scenario
Type of VPN:
Security scheme:
IP addressing:
Gateway
Client
192.168.0.1/24
Gateway A
(main office)
LAN IP
192.168.0.1
Figure 17. Telecommuter Example
N300 Wireless ADSL2+ Modem Router DGN2200v3
Scenario 1
PC/client-to-gateway, with client behind NAT router
IKE with pre-shared secret/key (not certificate based)
Fully qualified domain name (FQDN)
Dynamic
WAN IP
Internet
FQDN
ntgr.dyndns.org
"from_GW_A"
VPN Configuration
153
Gateway B
(regional office)
WAN IP
0.0.0.0
IP: 192.168.2.3
"toGW_A"
.
Client PC
(running NETGEAR
ProSafe VPN client)