Advertisement
Available languages
Available languages
INSTALLATION
DRAWINGS
(Pages 2 & 3)
"A" = 30 inches (76.2 cm) minimum clearance between
the top of the cooking surface and the bottom of an
unprotected wood or metal cabinet, or "A" = 24 inches
(61 cm) minimum when bottom of wood or metal cabinet
is protected by not less than 1/4-inch (6.4 mm) thick
flame-retardant
millboard covered with not less than No.
28 MSG sheet steel, 0.015-inch (0.381 mm) thick
stainless steel, 0.024-inch (0.610 mm) thick aluminum, or
0.020-inch (0.508 mm) thick copper.
To eliminate the risk of burns or fire by reaching over
heated surface units, cabinet storage space located
above the surface units should be avoided. If cabinet
storage is to be provided, the risk can be reduced by
installing a range hood that projects horizontally a
minimum of 5 inches (13 cm) beyond the bottom of the
cabinets.
FIGURE
1
1, 2, 3 - COMBUSTIBLE
BUILDING WALLS.
4 - COMBUSTIBLE
WALL CABINET.
A free-standing
range may be installed adjacent to (0"
from) combustible walls 1, 2 & 3.
FIGURE
1
NOTE: Figure may not be representative
of actual unit.
NOTE: FOR INSTALLATION
IN CANADA, A FREE
STANDING
RANGE IS NOT TO BE INSTALLED
CLOSER THAN 12MM FROM ANY ADJACENT
SURFACE.
-2-
Advertisement
