Connecting With An Rf Cable; Headphone Setup - LG LCD TV / LED LCD TV Owner's Manual

EXTERNAL EQUIPMENT SETUP

CONNECTING WITH AN RF CABLE

RS-232C IN
(CONTROL&SERVICE)
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
AV IN1
VIDEO L/MONO AUDIO
R
2
1
Connect the ANT OUT socket of the VCR to
1
VIDEO AUDIO
the ANTENNA / CABLE IN socket on the TV.
ANTENNA/
COMPONENT IN
CABLE IN
Connect the antenna cable to the ANT IN
2
socket of the VCR.
Press the PLAY button on the VCR and match
3
the appropriate channel between the TV and
VCR for viewing.

HEADPHONE SETUP

RS-232C IN
(CONTROL&SERVICE)
You can listen the sound through the headphone.
AV IN1
L/MONO
AUDIO R
2
1
Plug the headphone into the headphone socket.
1
AUDIO
ANTENNA/
OMPONENT IN
CABLE IN
To adjust the headphone volume, press the
2
+ or - button. If you press the MUTE button,
the sound from the headphone is switched off.
NOTE
► AUDIO menu items are disabled when connecting a headphone.(Except for 32/37/42/47LD460C)
► When changing AV MODE with a headphone connected, the change is applied to video but not to audio.
(Except for 32/37/42/47LD460C)
► Optical Digital Audio Out is not available when connecting a headphone. (Except for 32/37/42/47LD460C)
► Headphone impedance: 16 Ω
► Max audio output of headphone: 10 mW to 15 mW
6
OPTICAL
DIGITAL
AUDIO OUT
VIDEO
RGB IN (PC)
2
1
WIRELESS
AUDIO IN
/DVI IN
CONTROL (RGB/DVI)
AV IN2
RS-232C IN
(CONTROL&SERVICE)
AV IN1
L/MONO AUDIO
R
2
1
VIDEO AUDIO
ANTENNA/
COMPONENT IN CABLE IN
AV IN2
1
Wall Jack
2
Antenna
2
1