Location Requirements; Water Supply Requirements - Kenmore 66513342K606 Installation Instructions Manual

IMPORTANT: Observe all governing codes and ordinances. Failure to meet
codes and ordinances could lead to fire or electrical shock.
Proper installation is your responsibility.
• Contact a qualified installer to ensure that the dishwasher is installed
to meet all electrical and plumbing national and local codes and
ordinances.
• Install the dishwasher as specified in these instructions.
• Have everything you need to properly install dishwasher.
• Keep the dishwasher and water lines leading to dishwasher from
freezing. Damage from freezing is not covered by the warranty.
• This dishwasher is manufactured for indoor use only.
• Install and level dishwasher on a floor that will hold the weight, and in
an area suitable for its size and use.
Product Dimensions
24,, 23 ,,
(61cm)
333/4'`
(85.7cm)
48.9 cm)
11/2"
(3.75 cm)
Installation Clearances
Cutout Dimensions
24"
(61cm)
.3s/4"
Preferred Utility Area
/
A. Choose/eft-hand or fight-hand water connection route.
B. Choose/eft-hand or fight-hand e/ectfic connection and drain route,
NOTE: All holes should be drilled at 11/2'' (3.8 cm) diameter.
• A hot water line with 20 to 120 psi (138 to 862 kPa) water pressure.
• 120°F (49°C) water temperature at dishwasher.
• Flexible braided fill line (1/2" minimum plastic tubing is not
recommended).