Audio Settings (Audio) - Sony RDR-HX900 Operating Instructions Manual

Audio Settings (Audio)

The Audio Setup allows you to adjust the sound
according to the playback and connection
conditions.
1
Press SYSTEM MENU while the recorder is
in stop mode.
2
Select "SETUP," and press ENTER.
3
Select "Audio," and press ENTER.
The Audio Setup appears with the following
options. The default settings are underlined.
SETUP
Settings Audio ATT :
Video Audio DRC :
Audio Downmix :
Features Digital Out :
Options Dolby Digital :
MPEG :
Easy Setup DTS :
Audio ATT (attenuation)
If the playback sound is distorted, set this item to
"On." The recorder reduces the audio output level.
This function affects the output of the following
jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
On
Select this when the
playback sound from the
speakers is distorted.
Off
Normally select this
position.
Off
Standard
Dolby Surround
On
D-PCM
PCM
Off
Audio DRC (Dynamic Range Control) (DVDs
only)
Makes the sound clear when the volume is turned
down when playing a DVD that conforms to
"Audio DRC." This affects the output from the
following jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack
only when "Dolby Digital" is set to "D-PCM"
(page 92).
Standard
Normally select this
position.
TV Mode
Makes low sounds clear
even if you turn the volume
down.
Wide Gives you the feeling of
Range
being at a live performance.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has rear
sound elements (channels) or is recorded in Dolby
Digital format. For details on the rear signal
components, see "Checking the Play Information
and Playing Time" (page 38). This function
affects the output of the following jacks:
– LINE 2 OUT AUDIO L/R jacks
– LINE 1-TV jack
– LINE 3/DECODER jack
– DIGITAL OUT (OPTICAL or COAXIAL) jack
when "Dolby Digital" is set to "D-PCM"
(page 92).
Dolby
Normally select this
Surround
position.
Multi-channel audio signals
are output to two channels
for enjoying surround
sounds.
Normal Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
,continued 91