Page 1
Installation Instructions For A-Kit 22" Please read ALL instructions before installing. people are recommended to install this product. a new electrical outlet is required, have the outlet installed by a qualified electrician before installing unit. See #5 in Preliminary Instructions following.
4. CHECK FOR ANYTHING THAT COULD Tools Required BLOCK AIRFLOW - check area outside of window things such as shrubs, trees, or awnings. Inside, be sure a large flat blade screwdriver furniture, drapes, or blinds will #2 Phillips screwdriver stop proper airflow.
Window Mounting Remove Chassis Assemble Window Filler Panels To slide chassis from cabinet, hold cabinet Place cabinet on floor, a bench, or a table. with left hand, while pulling on strap provided at the front of the unit. Slide "I" section of window filler panel into...
Page 4
Install Window Lock Place Cabinet Sash Seal Trim sash seal to fit window width. Insert Open window. Mark center of window stool. into space between upper and lower sashes. Place cabinet in window with bottom stool angle firmly seated over window stool shown.
Page 5
Extend Window Install Chassis into Panels and Install Front to Unit Extend panels to fill window opening Lift chassis and carefully slide it into installed completely: Install the (2) Frame to Sash screws cabinet. as shown. 2. _ Do not push on controls finned coils.You could...
Thru-The-Wall Installation Carefully measure and cut an opening with NOTE: Consult local building codes prior following dimensions. See FIGS. 1 and 2. installation, or a qualified carpenter. WIDTH "X" = 24-1/4" plus twice Location thickness of framing material used. HEIGHT "Y"...
Page 7
NOTE: If wall thickness is 7" (178 mm) or more, add aluminum flashing over bottom of frame opening to assure no water can enter area 1"LONG FIG. 2 between inner and outer wall. OPTIONAL: Support brackets may be used. Installation brackets are recommended for walls...
OPTIONAL:Caulkingandinstallationof trim on interior wall maybe done.Youcan buy wood from your local lumber or hardware supply. On the outside, caulk openings around top and sides of cabinet, and all sides of wood sleeve to the opening. NOTE: See Step 7, Item 3 of Window Mounting Instructions for bottom...