Table of Contents
Advertisement
Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print
images without going through a computer.
. To set up the camera before connecting to a printer
1.
Turn on the camera and press [MENU].
2.
On the "¥ SETTING" tab, select "USB" and then press [6].
3.
Use [8] and [2] to select "PictBridge", and then press [SET].
. Connecting the Camera to a Printer
Use the USB cable that comes bundled with the camera to connect the camera to
your printer's USB port.
• For details about connecting to the camera and precautions when connecting, see
page 22.
• The camera does not draw power over the USB cable. Check the battery level
before connecting and make sure it is not too low.
• Make sure that the camera is turned off before plugging in or unplugging the cable.
Check the user documentation that comes with the printer for information about
requirements before plugging into or unplugging from the printer.
Small connector
USB cable
(included with camera)
141
USB port
Large connector
USB
Printing
Advertisement
Table of Contents
