Zanussi ZOA35502XD User Manual page 15

Product manaul
Hide thumbs Also See for ZOA35502XD:
Table of Contents

Advertisement

gasket is damaged. Contact the Service
Centre.
• To clean the door gasket, refer to the general
information about cleaning.
Removable shelf supports and catalytic
panels
To clean the oven, remove the shelf supports
and catalytic panels.
Warning! Be careful when you remove
the shelf supports. The catalytic panels are
not attached to the oven walls and can fall out
when you remove the shelf supports.
Warning! Before maintenance, make sure
that the appliance is cool. There is a risk of
burns.
1
Pull the front of
the shelf support
away from the side
wall.
Hold the rear end of
the shelf support and
the catalytic panel in
position with the oth-
er hand.
Installing the shelf supports
Install the shelf supports in the opposite se-
quence.
The rounded ends of the shelf supports
must point to the front.
Catalytic walls
The walls with catalytic enamel are self-clean-
ing. They absorb fat which collects on walls
when the oven operates.
To support the self-cleaning process:
1. Activate the oven lamp.
www.zanussi.com
2
1
2
Pull the rear end
of the shelf support
away from the side
wall and remove it.
2. Remove the accessories from the appli-
ance.
3. Clean the oven floor with warm water and
washing-up liquid, then dry it.
4. Set the function
ture.
5. Let the empty appliance operate for one
hour.
6. When the appliance is cool, clean it with a
soft and moist sponge.
Warning! Do not clean the catalytic
surface with oven sprays, abrasive
cleaning agents, soap or other cleaning agents.
There is a risk of damage to the catalytic
surface.
Warning! Keep children away when you
clean the oven at a high temperature. The
oven surface becomes very hot and there is a
risk of burns.
Discolouration of the catalytic surface has
no effect on the catalytic properties.
Oven ceiling
You can remove the grill to clean the oven ceil-
ing more easily.
Warning! Deactivate the appliance before
you remove the grill. Make sure that the
appliance is cold. There is a risk of burns.
1
Remove the screw
which holds the grill.
For the first time, use
a screwdriver.
Clean the oven ceiling with a soft cloth with
warm water and a cleaning agent, and let it dry.
Installing the grill
and maximum tempera-
2
Carefully pull the
grill down.
The oven ceiling is
ready to clean.
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zoa35502

Table of Contents