Table of Contents
Advertisement
9-58 Upgrading Your Server
Installation (IDE File Devices)
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Pull out the server from the rack.
3.
Remove the drive cover.
4.
Unlock the lever of the optical disk drive, then take the optical disk drive out of the
chassis.
IMPORTANT:
Do not touch any other part than release lever when removing the
optical disk drive. Otherwise, your fingers may be caught.
When an optional USB floppy disk drive has been installed, pull out
the device carrier on its half way, and disconnect the USB cable.
Pulling the device carrier completely with USB cable being
connected may cause damage to the USB connector.
Advertisement
Table of Contents
Troubleshooting
