External Devices - NEC N8100-1005F User Manual

CPU
To check the installed CPU status
Select [Main] - [Advanced Processor Options] – [Processor 1 CPUID] and check the
status indications.
To clear the CPU error information
Select [Main] - [Advanced Processor Options] - [Processor Retest] – [Yes] and reboot.
Keyboard
To set Numlock
Select [Advanced] - [Numlock] – [Auto]/[On]/[Off].
Security
To set passwords on the BIOS
Select [Security] - [Set Administrator Password] and enter a password.
Select [Security] - [Set User Password] and enter a password.
Set Administrator password first, then User password.

External Devices

To set up external devices
Select [Advanced] - [I/O Device Configuration] and set up each device.
Internal Devices
To set up internal PCI devices of the server
Select [Advanced] - [Advanced Chipset Control] - [PCI Device] and set up each device.
To install the disk array controller board or SCSI controller board
Select [Advanced] - [PCI Configuration] - [PCI Slot n Option ROM] - [Enabled].
n: slot number
To clear the hardware configuration data (after installing/removing internal devices)
Select [Advanced] - [Reset Configuration Data] - [Yes].
Configuring Your Server 4-7