NEC Express5800 Series User Manual page 18

14 Using the NEC ESMPRO Agent
From the CPU tab you can set the following information:
Sample Interval ⎯ Adjusts the CPU load monitoring cycle. Sample Interval can be set to
1, 2, 3, 4, 5, 6, 10, 12, 15, 20, 30, or 60 seconds.
Utilization Rate ⎯ Adjusts the CPU load monitoring utilization rate. Utilization Rate can
be set to load for 1 min, 5 min, 30 min, 1 hour, 1 day, or 1 week.
Thresholds ⎯ Set the CPU load monitoring thresholds (%) for fatal and warning alerts in
the Report and Reset fields.
– CPU: Select the appropriate button for individual or total CPU load and set the
monitoring thresholds in the Thresholds section.
– Enable thresholds: When checked, thresholds settings for the CPU load are active.
– Fatal: The Report field specifies the high CPU load limit that generates a fatal alert.
The Fatal alert is reset when the CPU load falls below the threshold in the Reset field.
– Warning: This is similar to the Fatal fields, except a warning alert is generated or reset.
When the CPU load exceeds the amount in the Report field, a Warning alert is
generated. The Warning alert is reset when the CPU load falls below the threshold in
the Reset field.
From the LAN tab you can set the following information:
Enable threshold ⎯ Specify the LAN monitoring function.
When enable the monitor, the startup of the ESMLANService turns to the Auto.
Otherwise the startup turns to the Disable.
Sample Interval ⎯ Adjusts the LAN monitoring cycle.
Network hardware error percentage ⎯ Percentage of Network Hardware error per
monitoring cycle. Please check that the network cables are tightly connected and the HUB
power switch is on.
Network Hardware errors: